Abusemark NAZE32 Setup-Handbuch

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Drohne & Quadcopter Zubehör Abusemark NAZE32 herunter. Abusemark NAZE32 4 Seiten. Radio gear

Seite drucken

NOTE!!!

TIPS ON CONNECTING YOUR RADIO GEAR AND SOME

ADDITIONAL INFORMATION:

BOARD TOP VIEW

WARNING!!! ALL SETUP PROCEDURES SHOULD BE DONE

WITHOUT

PROPELLERS INSTALLED!!!

RECEIVER CONNECTIONS:

With the connector facing out, the pins are used as follows. Unmarked pin

(left-most top side) is ground, pin marked with dot is 5V supply, the rest are

RC signal pins for CPPM (channel 1) or channels 1 through 8.

Standard female to female servo cable can be used to connect a CPPM receiver. Default channel order is

AIL, ELE, THR, RUD, AUX1..AUX4. A breakout cable is provided for connection to standard receiver.

STANDARD(PCM) RECEIVER:

Connect AIL to 1, ELE to 2, THR to 5, RUD to 6, and AUX1/2 to channels 7 and 8.

FUTABA SBUS RECEIVER

Connect SIGNAL INVERTER (GROUND to G pin, +5v to pin marked «•» and SIGNAL to pin 4(bottom row)