Data Harvest EasySense Q 5 Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch für Datenlogger Data Harvest EasySense Q 5 herunter. Data Harvest EasySense Q 5 20 Seiten.

Seite drucken

What else is required?

Sensing Science Laboratory or Primary software – a specific application that allows
transfer of the captured data to a computer for display and analysis and has the USB
drivers for EasySense Q (these are located on the Sensing Science Laboratory or
Primary CD ROM).
Note: To use EasySense Q you will need Issue 4 or higher of the Sensing Laboratory or Primary
PC Windows software (Product No. 6488 or 6489 respectively) V1.09 i.e. Graph V2.51, Meter
V1.35, Timer V1.24, Workroom V1.22.

The EasySense Q data logger

EasySense Q is a fully self-contained portable data logger. It has built-in sensors, which
allow collection of data.
The current measurement from a sensor can be viewed on the LCD screen. Data can
be gathered either when EasySense Q is connected to a computer or stored as data
sets in its memory for retrieval and analysis by the computer at a later date. Up to four
data sets can be stored at a time.
LCD Display
USB
compatible input
Power light
Connection for
power supply
Q 5 only - built-in Barometric
Pressure sensor (not visible)
EasySense Q buttons
EasySense Q has three buttons that are used to select the operating mode.
The green triangle (ENTER) is used to start data collection, to confirm a choice or
take a sample.
The red square (STOP) is used to end data being recorded or return to the main
menu.
Inputs for plug-in sensors
(dual labelled as 1A and 2B)
1
A
Meter
Snapshot
EasyLog
Timer
POWER
Q 5 only - built-in Humidity
sensor (grid visible)
Q 3 & 5 - built-in Light sensor
(visible in square slot)
2
INPUT
B
5
Red square
(STOP button)
3
Q 3 & 5 - built-in Sound sensor
(grid visible)
Q 3 & 5 - built-in
Temperature
sensor
(not visible)
Green triangle
(ENTER/SELECT
button)
Yellow arrow
(SCROLL down
button)