Data Industrial 330 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Relais Data Industrial 330 herunter. Data Industrial 330 9 Seiten. Relay control

Programming

Programming the Model 330 is accomplished by installing the Data Industrial programming software on

a computer and entering data on templates of the Windows

1. Load the interface software into the computer.

2. Connect the computer to the Model 330 transmitter with the Data Industrial A-301 communications

cable to the socket labeled D.I.C Comm Port, taking care to properly align the tab on the plug and

socket to maintain polarity. Connect the DB9 connector of the Data Industrial A301 communications

cable to a PC com port that has the Model 330 software installed.

3. Connect the Model 330 transmitter to a power supply.

4. Open the interface software and select the appropriate COM PORT as shown in the dialog box

below.

5. Open the Parameters Screen as shown below.

To go to the calibration

settings screen press

"Parameters" from either

place shown.

Data Industrial

based program.

Model 330 Owner's

Manual