Data-Linc Group LCM100 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Modem Data-Linc Group LCM100 herunter. Data-Linc Group LCM100 10 Seiten. Line carrier modem

Seite drucken

DATA-LINC

Connector J2 (Female)

Please note that male pin numbering is a mirror image of the female connector depicted below:

13 12 11 10 9

25 24 23 22 21 20 19 18 17 16 15 14

Figure 3: DB-25P J2 Connector Pins

Description

9-19

Pins 9-19 are unused, open.

Data Terminal Ready

Data Terminal Ready output; indicates that the terminal is on and

operational. This line is enabled, pulled up to +12 volts through a 4.7K ohm

resistor.

Notes

1. On the LCM100-1 module pin 8 is not carried at the connector through P3 because most

computers provide this signal. Pin 8 may be carried to the connector, if desired.

2. On the LM100-2 module, the carrier detect signal is available at the connector because the

interconnected equipment is receiving a signal. Pin 8 may be disconnected at P3, if desired.

PN 161-09998-001A

GROUPp

8 7

3 2 1

Get other manuals https://www.bkmanuals.com

LCM100 User's Guide