Addtron Technology AWS-110 Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drahtloser Zugangspunkt Addtron Technology AWS-110 herunter. Addtron Technology AWS-110 15 Seiten. 11mbps wireless access point
Auch für Addtron Technology AWS-110: Schnelles Benutzerhandbuch (6 seiten)

Seite drucken
TABLE OF CONTENT
TABLE OF CONTENT...........................................................iii
Introduction........................................................................... 1
.....................................................2
Driver Installation ................................................................... 3
Configuration Utility ............................................................. 13
............................................. 16
............................................... 27
iii
Wireless Access Point
98 .....................................3
ME.................................... 6
2000 .................................. 9
................................... 13
............................ 18

Introduction

The IEEE 802.11b Wireless Access Point allows you to put your
Wireless LAN into the infrastructure mode. In the infrastructure
mode, the Wireless Access Point converts airwave data into wired
Ethernet data, acting as a bridge between the wired LAN and wireless
clients. Connecting multiple Access Points via a wired Ethernet
backbone can further extend the wireless network coverage. As a
mobile computing device moves out of the range of one access point,
it moves into the range of another. As a result, wireless clients can
freely roam from one access point domain to another and still
maintain seamless connection to the network.
Features
§
Complies with the IEEE 802.11b Direct Sequence Spread
Specifica tion
§
Complies with IEEE 802.3
§
Supports 11, 5.5, 2 and 1 Mbps Data Rates on the wireless
interface
§
Supports 10 Mbps Data Rate on the Ethernet interface
§
WEP 64-bit data encryption for security
§
Roaming capability
§
Provides SNMPv1 management
§
Remote management via SNMP protocol
§
Local management via console port
§
Firmware upgrade via console interface
§
Requires
5V@800mA
power supply
§
FCC Certified under Part 15 to Operate in 2.4GHz ISM Band
§
Driver Support Microsoft Windows
Wireless Access Point
®
98, 2000, and Millennium
1