4iiii Sportiiiis Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor 4iiii Sportiiiis herunter. 4iiii Sportiiiis 2 Seiten. Heads up display system
Auch für 4iiii Sportiiiis: Benutzerhandbuch (19 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (2 seiten)

Seite drucken

Download the Sportiiiis User Guide & Software

The Sportiiiis User Guide and Configuration Utility software are available for download at:

http://www.4iiii.com/support.html

Charging Sportiiiis

To charge your Sportiiiis unit, uncover the micro-USB port on the bottom of the unit and plug in the

included USB 2.0 Charge/Sync Cable. Plug the other end of the cable into one of your computer's

USB ports a USB power adapter.

When your Sportiiiis unit is connected to your computer and you are running the Sportiiiis Software

Application, the battery icon on the bottom left of the interface will indicate the charge status and

percentage of battery power currently available in your Sportiiiis unit.

The Sportiiiis User Guide has

instructions on the use of the

Sportiiiis unit and Configuration

Utility.

Mounting Sportiiiis on Your Glasses

1. Insert tie wraps into mounting bracket loosely,

as shown below:

2. Slide the Sportiiiis unit into the mounting bracket.

3. Align the Sportiiiis unit on the glasses as you'd

like it to be mounted. At this point, choose

whether you'd like the boom on the inside or the

outside of the lens (extra tie wraps are included

so that you can change your mind later).

Boom Outside Lens

Boom Inside Lens

4. Carefully tighten the tie wraps to fix the

mounting bracket in place.

5. Slide the Sportiiiis unit off of the mounting

bracket and cinch down the tie wraps as much

as possible.

6. Cut as much of the excess tails from the tie

wraps as you can.

7. Slide your Sportiiiis unit back onto the mount,

bend the boom into its final position, and go out

and enjoy your Sportiiiis unit!