Durr EcoGun 651 Betriebshandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Farbspritzgerät Durr EcoGun 651 herunter. Durr EcoGun 651 20 Seiten. High-pressure automatic spraying gun
Seite drucken» The warranty is not applicable for parts of a consumer nature, for
example, sealing elements, springs, jet with needle, stop valve and
the jet for which wearing depends on the abrasive properties of the
applied substance, pressure and other circumstances.
TROUBLESHOOTING
FAULT
Insufficient spraying
power
Bad spraying pattern
Leak of the pressure NH
from sealing module
Leak of pressure air
from sealing module
- spraying head
improperly opens
or closes at higher
pressure
CAUSE
» Low pressure of
sprayed material
» Clogged filter cartridge
in the pump high-
pressure filter
» Partially clogged
cartridge
» Very small nozzle
» Large nozzle
» Low pressure of
sprayed material
» Low viscosity of
sprayed material
» Damaged sealing
module or needle
» Damaged sealing
module or needle
REMEDY
» Increase the pressure on the
pump
» Clean, resp. replace the filter
cartridge
» Clean, resp. replace the
cartridge
» Use larger nozzle
» Select smaller nozzle
» Increase the material pressure
at the pump
» Dilute the applied material
acc. to manufacturer's
instructions
» Replace the sealing module
and needle for the new ones
» Replace the sealing module
and needle for the new ones
EcoGun 651
13