4IPNET EAP701 Handbuch zur Schnellinstallation - Seite 15
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Drahtloser Zugangspunkt 4IPNET EAP701 herunter. 4IPNET EAP701 18 Seiten. Enterprise access point
Seite drucken
Step 3. Configure VAP (Virtual Access Point) Profile Settings
The EAP701 supports up to 8 virtual APs (VAPs).
Configure VAP profile settings：
(a) Select the VAP Configuration tab to configure the settings of the desired VAP.
(b) Choose a specific RF card to set up
(c) Enable a selected VAP from the drop-down menu of Profile Name and configure related
settings below.
Check "CAPWAP Tunnel Interface" if you would like data of this VAP to go through the
(d)
Controller when the Access Point is managed by CAPWAP.
Check VAP status：
After finishing VAP configuration, the status of the enabled Virtual APs shall be reflected on the VAP
Overview page – at Wireless > VAP Overview.
Copyright © 4IPNET, INC. All rights reserved.
VAP Configuration Page (VAP-1 shown)
11
Quick Installation Guide
EAP701 Enterprise Access Point
ENGLISH