4IPNET EAP705 Produkt-Handbuch - Seite 14
Blättern Sie online oder laden Sie pdf Produkt-Handbuch für Drahtloser Zugangspunkt 4IPNET EAP705 herunter. 4IPNET EAP705 17 Seiten. Enterprise access point
Seite drucken
Step 3. Configure VAP (Virtual Access Point) Profile Settings
The EAP705 supports up to 8 virtual APs (VAPs) per radio.
Configure VAP profile settings
(a) Select the VAP Configuration tab to configure the settings of the desired VAP.
(b) Choose a specific RF card to set up
(c) Enable a selected VAP from the drop-down menu of Profile Name and configure related
settings below.
(d)
Check "CAPWAP Tunnel Interface" if you would like data of this VAP to go through the
Controller when the Access Point is managed by CAPWAP.
Check VAP status
After finishing VAP configuration, the status of the enabled Virtual APs shall be reflected on the VAP
Overview page – at Wireless > VAP Overview.
Copyright © 4IPNET, INC. All rights reserved.
VAP Configuration Page (VAP-1 shown)
：
：
EAP705 Enterprise Access Point
10
Product Handbook
Product Handbook
Product Handbook
Product Handbook
ENGLISH