4IPNET EAP706 Handbuch zur Schnellinstallation - Seite 9
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Drahtloser Zugangspunkt 4IPNET EAP706 herunter. 4IPNET EAP706 19 Seiten. Enterprise access point
Seite drucken
Step 2. Connect one end of the Ethernet cable to the Uplink port and the other end of the cable to a switch,
a router, or a hub; or use the 110 punchdown block as your uplink connection. The 110 punchdown
block may be connected with the following pin assignment:
Orange
White Orange
Brown
White Brown
The EAP706 is now connected to your existing wired LAN network.
Step 3. There are three ways to supply power to EAP706
a) Connect the DC power adaptor to the power jack socket.
b) The Uplink port is capable of receiving PoE. Connect an IEEE 802.3af-compliant PSE device
(e.g. a PoE-switch) to the Uplink port of EAP706 with the Ethernet cable.
c) Use a standard 110 punchdown tool to punch copper wires onto the punchdown block (uplink)
Step 4. Fasten the Access Point to the mounting plate
a) Align the Access Point to the mounting plate using the arrow printed on the back of the Access
Point.
Copyright © 4IPNET, INC. All rights reserved.
Blue
White Blue
Green
White Green
5
Quick Installation Guide
EAP706 Enterprise Access Point
ENGLISH