DURRIDGE RAD7 Handbuch Konnektivität - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch Konnektivität für Messgeräte DURRIDGE RAD7 herunter. DURRIDGE RAD7 4 Seiten. Passive, slow response radon in water accessory
Auch für DURRIDGE RAD7: Handbuch für Bluetooth-Verbindungen (4 seiten), Benutzerhandbuch (7 seiten), Benutzerhandbuch (15 seiten)

Seite drucken

Operation:

1. Power the RAD7 ON. Using the RAD7 keypad, select >Special SetBaud and set the RAD7's baud

rate to 9600, and press Enter on the RAD7 keypad.

2. Plug the Parani SD1000 Serial to Bluetooth Adaptor into the RAD7's RS232 DB9 socket. Make

sure the SD1000 adaptor's power cord is connected or its battery is in place, and slide the SD1000

adaptor's power switch to ON.

3. Launch the DURRIDGE CAPTURE software (available from the DURRIDGE website at https://

durridge.com/software/capture/) on your Windows or macOS computer. By default CAPTURE

scans for connected RAD7s automatically at launch. If this function is disabled, click the Scan For

Devices button near the lower right corner of CAPTURE's Main Window.

4. CAPTURE should detect the Bluetooth-enabled RAD7. If it does not, verify that the SD1000

adaptor has been paired with the computer, as described above.

5. Once the Bluetooth-enabled RAD7 has been detected, it will be possible to proceed with all of the

standard CAPTURE operations, including downloading and graphing RAD7 data. For more

information on using CAPTURE, please refer to the CAPTURE User's Manual at 

https://durridge.com/documentation/capture_help/

Note: If the SD1000 adaptor is turned oﬀ at any point after it has been discovered, restart the computer

and turn the SD1000 adaptor back on before performing any further CAPTURE operations. Otherwise,

CAPTURE may stall while attempting to communicate with an unavailable port. 