Durston Tools Guillotine Anleitung Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Werkzeuge Durston Tools Guillotine herunter. Durston Tools Guillotine 6 Seiten.

The Guillotine may need to be assembled before use. Please ignore this part of the instructions if your Guillotine is
already assembled.
Carefully unpack the Guillotine and discard any packing materials.
Please the Guillotine on a flat surface and assemble as follows:
1. Attach the Depth Stop to the Guillotine. Undo
the two M5x16 Cap Screws from the ruler.
2. Offer up the Depth Stop to the Guillotine.
3. Screw the two M5x16 Cap Screws into the holes
and tighten up.
4. Now Insert the handle and screw in the
M5x25mm screw.
Place the Guillotine on a secure and non-moveable bench, or substantially built stand and bolt to the surface. There
are four bolt holts. Two are visible at the rear of the Guillotine and two are under the main plate.
Do not attempt to cut stainless steel, heat treated or hardened materials.
The maximum thickness capacity is 10 gauge in mild steel.
Always wear safety glasses, protective clothing and tie back long hair.
Never cut rusted materials when the blades have lost their sharp edge.
Never cut rusted materials or greasy/oily materials – always clean them first.
Assembly Instructions
Safety
M5x16 Cap Screws
Guillotine
Depth Stop
Tighten Screws
Handle
M5x25 Screw
1