Elsema GLR2704 Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Empfänger Elsema GLR2704 herunter. Elsema GLR2704 9 Seiten. Multi-channel 27mhz gigalink receiver

Seite drucken
Elsema GLR2704 Schnellstart-Handbuch
Four billion codes
The user can easily change the code on all the channels. Momentary joining the two CC pins on the receiver board sets
all channels to one random code. One of 4,294,967,296 possibilities is selected.
Code Programming
For code programming, please refer to the separate programming instructions.
When programming is completed and the GIGALINK cable is removed from the multi channel receiver-coding socket,
the 2-way dip switch is used to select different output modes. This is described below.
Output Modes
Relay output on the receiver can function in either momentary or latching mode. By default the mode is set to
momentary. Modes selectable from the 4-way dipswitch. Dipswitch 1 corresponds to relay channel 1 and dipswitch 2
corresponds to relay channel 2 and so on.
Factory Default = Momentary
Momentary - Output is active for as long as the transmitter button is pressed.
This is a standard mode on most automatic gates or garage door openers.
Latching
- Output remains active until next press of the transmitter button.
Similar to switching "on" and "off" a light.
Security
- Output remains active until power to the receiver is removed. Similar to security alarms
Latching
and fire alarms. To activate the security latching mode, a link needs to be soldered into the
hole marked as latching.
Customised Software
Custom output modes can be programmed to do special functions. Call Elsema for more details.
AC/DC Supply and Antenna
AC/DC power supply and antenna is connected via a screw-type terminal block. Do not connect the supply to the 2.5-
mm coding socket since connection may damage the microcontroller.
Unique Code System
The microcontroller EEPROM allows large volume users to have a unique code. This enables Elsema to offer
everyone "your own" radio control.
Case
The three or four-channel receiver is supplied without a case, this allows the receiver to be integrated according to
your needs. Elsema has Quick Mount bracket which enables easy mounting to walls, roof etc.
Multi-Channel 27MHz Gigalink Receiver, GLR2703, GLR2704
- 2 -
ELSEMA