Cayken 925BE Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Bohrer Cayken 925BE herunter. Cayken 925BE 20 Seiten.

Step 3: Source of water joins , the radom ware additional water inlet of flaxible

tube holds to have " fast joint" may join to wire reinforced suction hose very

conveniently on water supply system.

Pay attention: If the protector function of leakage of electricity is not normal ,

please do not want manipulator ware.

Step 4: Safety is tested , pressing generator switch and machine ( soft start

switch ) start smoothly. Press the protector button of leakage of electricity of " test ",

machine stops operation , then resumes the power supply for machine again

according to the button of " reset ".

Pay attention: Must cannot soak the protector of leakage of electricity in water.

Must often pass according to press TEST button, come to inspect its function whether

is normal. Suggesting operator not to operate do not take the diamond drilling

machine of the protector of leakage of electricity.

BEGIN TO OPERATE

1、Choose suitable diamond bit

The silk of main shaft of our company deducts 4 kinds uses type frequently,

please choose the reliable diamond bit of quality. Choose sharp tool , ! And ensure

that segement is first to have enough backlash( the thickness of segement the thic-

kness that is larger than tube wall , such do good to more in row bits) between me-

tal tube wall. It is above that using waterproof oil paint in the silk of bit to deduct,

in order to make dismantling bit convenient. Ensure bit way jump do not be larger

than 1 mm( eccentricity).

2、Fix frame in face

Regular method has expansion bolts to fix ; vacuum sucker is fixed ; supports

regular etc..

The most general method is fixed for expansion bolt, please use the diameter

of metal expansion bolt and bolt as far as possible, must be larger than 12 mm.

Using vacuum sucker fix , ensure that vavuum pump has enough efficiency,sealing

ring complete have no breakage. Adopting support ensure when fixing way that

frame has enough stability.

Fix using expansion screw regular way, first, will guarantee that face and the

base of machine will be balanced , if have , it is high! Please use the spanner that

takes in machine attachment for low injustice,the 4 adjustment screws on

regulation base are balanced till base. After being fixed completely, machine

should guarantee that generator will not slide on rack . And will make efforts

around around pull to move pillar , will guarantee that when pillar is not around ,

sway side may use machine.

Pay attention: Our company suggests to use expansion bolt regular way to fix

vigorously, and the location of expansion screw lets egg to pillar direction to be

near is best. Since fixing consequence our company that not causes firmly , do not

undertake any duty.

Vertical upward drill hole, must ensure special turn water to obtain basin , gua-

rd against generator strictly cannot enter water. In working error any suspension,

open only to start machine road can.Ensure to take the charge of machine fear sta-

rt former bit may turn freely.Is not blocked in hole.