Cayken KCY-50QE Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Bohrer Cayken KCY-50QE herunter. Cayken KCY-50QE 12 Seiten.

Seite drucken
Cayken KCY-50QE Gebrauchsanweisung

MACHINE MODEL PARAMETER LIST

Specifications
KCY-35QE
Core drill dia
35
mm
110/220~
Rate voltage
V
16000
Max attraction
N
1600
Rate input power
W
No-load speed
rpm
810
14
Net weight
Kg
Net weight
20.5
Kg
Package size
cm
35*25*43
Attention:To improve product constantly, our reservation does not need the power
of informing in advance for technical data change.
State: Cause by fixing not firm or not proper security measures for accident , our
company does not undertake any responsibility.
ADVANTAGES OF AUTOMATIC MAGNETIC DRILL
Automatic magnetic can be operated both manual and automatic
1.In automatic mode ,install the appropriate annular cutter, and start the
machine, it will automatic feeding and automatic return back .
2.one operator can operate several machines , this greatly improves work
efficiency.
3.In automatic mode, the feeding speed is constant, which will protect the
annular cutter and extend the ser vice life of the annular cutter.
KCY-50/2QE
KCY-80/3QE
50
80
110/220~
110/220~
16500
17600
1700
2690
280/510
130/300/620
15.3
16.6
22.8
27
35*25*43
35*26*45
4.All the automatic models are with oil bath motor , the gear oil in oil-bath
motor has good extreme pressure, when gear-occlude , the temperature of
the friction surface is high enough, a chemical reaction occurs on the surface
of the gear. And the surface of the gear will formed metal film. That will
prevent the gear from wearing out and extend the ser vice life of the gear.

Position Descript

Shift when the machine stops or will stop.
Shift in place. If the spindle doesn't rotate or there is some noise after
starting up, the gear may not shift in place. Turn off the machine im
mediately, and then shift the gear to proper place, rotate the spindle
back and forth (easy to shift) at the same time till shift in place
Do not shift when the machine is full-speed operated, over load or stuck.
IMAGE 1
1，
Low-speed
Turn the knob clockwise if turn form low speed to high speed.
otherwise counter-clockwise.
-- Low-speed May replace tapping for more hard material or big bit to use .
--High-speed
1，
L-
IMAGE 2
Low-speed
representation is the files of low speed ，
Turn the knob clockwise if turn form low speed to high speed.
otherwise counter-clockwise.
L --
Low speed
May replace tapping for more hard material or big bit( cutting tool) to use
M--
middling speed
H--
The bit for more soft material or little support ( cutting tool )
High speed
10
9
M
L
H
IMAGE 2
IMAGE 1
,
High
-speed
，Graphic representation is low speed,
The bit for more soft material or little support ( cutting tool )
,
H-
High
,
M-
middling speed
-speed
The fried dough twist for suitable size gets into , hollow get into
(
3 files types )
，graphic