Elsner 70481 Technische Daten und Installationsanweisungen
Blättern Sie online oder laden Sie pdf Technische Daten und Installationsanweisungen für Schalter Elsner 70481 herunter. Elsner 70481 2 Seiten. Display and touch switch
Seite drucken
EN
Corlo Touch KNX 5in (WL)
Display and Touch Switch
Technical specifications and installation instructions
Item numbers 70475 (Corlo Touch KNX 5in WL), 70481 (Corlo Touch KNX 5in)
1.
Description
The Display Corlo Touch KNX 5in for the KNX system offers a variety of options
for its use: Its touch-sensitive glass interface means that it can be used as a normal
switch. The high resolution display is ideal for displaying text, images or graphics.
In addition to current readings and messages, the KNX bus system can also display
photographs, for example. Concurrently, you can set up the Corlo Touch KNX
5in as a control center for automatic shading, ventilation and air conditioning re-
gulation.
With the Corlo Touch KNX 5in WL model, you can also show network content
on the display using the WLAN connection, e.g. web pages, IP camera images or
visualizations. The Corlo Touch KNX 5in WL display screen can, for example, be
shown on a Smartphone, if a VPN connection is provided externally.
Functions:
•
5" touch-sensitive interface
•
10 display pages, which can be configured with different areas for control
or display purposes, for example switches, buttons, rocker switch, rotary
knob, readings
With the Corlo Touch KNX 5in WL model, you can display predefined web
pages using the WLAN connection. You enter URL addresses in the ETS
•
Icons for display can be exchanged (symbol library in the device, own
pictures from by micro SD card)
•
Ambient lighting with individually variable colors (RGB)
•
Integrated proximity sensor. Enables proximity switching and fast
activation of the display from standby mode
•
Integrated brightness sensor for automatic adjustment of the display
lighting
•
Integrated scene control(16 scenes), timer, alarm clock
•
5 automatic channels, integrated automation for ventilation
(windows, ventilation equipment), for shading (shutter, blinds, awning) for
air conditioning regulation (heating, cooling) and for light
•
4 AND and 4 OR logic gates each with 4 inputs. 16 logic inputs (in the
form of communication objects) are available as inputs for the logic gates.
The output of each gate can be optionally configured as 1-bit or 2 x 8-bit
•
4 inputs for binary contact or temperature sensor
•
Micro SD card socket e.g. as storage for image data
•
Corlo Touch KNX 5in WL model: WLAN interface for wireless data
transfer from or into local networks. Due to limited system resources,
intensive use can lead to delays when loading the content.
Configuration is made using the KNX software ETS. The product file can be dow-
nloaded from the Elsner Elektronik website on www.elsner-elektronik.de in the
"Service" menu.
1.1. Deliverables
•
Display unit with mounting unit and fixing screw
•
Connection line
Optional accessories:
(not included in the deliverables):
•
T-NTC temperature sensor (No. 30516)
•
Micro SD card for image data (off the shelf)
1.2. Technical data
Housing
Glass: real glass, tempered
Housing: plastic
Display
Visible diagonal: 5 inches
Resolution: 800 × 480 pixel
Viewing Angle: 12 o'clock viewing direction
Opening angle x: -70° to +70° typ.
Opening angle y: -60° to +60° typ.
Colours
• Black glass, edge glossy black
• Custom colours on request (see
"Colours for display edge and housing" auf
Seite 1)
Display Corlo Touch KNX 5in
Assembly
Dimensions
Weight display unit
Corlo Touch KNX 5in
Weight display unit
Corlo Touch KNX 5in
WL
Ambient temperature
Ambient humidity
Operating voltage
Bus current
Power consumption
Corlo Touch KNX 5in
Power consumption
Corlo Touch KNX 5in
WL
Data output/
bus communication
BCU type
PEI type
Group addresses
Assignments
Communication objects
Other data interfaces
Inputs
Setting range of tempe-
rature sensor T-NTC at
input of Corlo Touch
Supported WLAN Stan-
dards Corlo Touch KNX
5in WL
Supported WLAN Secu-
rity
Corlo Touch KNX 5in
WL
The product conforms with the provisions of EU guidelines.
1.3. Customizing options
1.3.1. Colours for display edge and housing
The standard colour for the display edge and housing is glossy black. Special
paints are possible, e. g. to RAL or automobile paint colour codes. Please ask for
your desired colour.
The glass pane is only available with black painting, special colours are not possi-
ble.
2.
Installation and start-up
2.1. Installation notes
Installation, testing, operational start-up and troubleshooting should
only be performed by an electrician.
CAUTION!
Live voltage!
There are unprotected live components inside the device.
•
National legal regulations are to be followed.
•
Ensure that all lines to be assembled are free of voltage and take
precautions against accidental switching on.
•
Do not use the device if it is damaged.
•
Take the device or system out of service and secure it against
unintentional use, if it can be assumed, that risk-free operation is
no longer guaranteed.
The device is only to be used for its intended purpose. Any improper modification
or failure to follow the operating instructions voids any and all warranty and gua-
rantee claims.
After unpacking the device, check it immediately for possible mechanical damage.
If it has been damaged in transport, inform the supplier immediately.
Display Corlo Touch KNX 5in • Version: 06.04.2020 • Technical changes and errors excepted. • Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany • www.elsner-elektronik.de • Technical Service: +49 (0) 7033 / 30945-250
Flush mounting
(Wall installation in junction box
Ø
60 mm)
Housing overall approx. 133 × 97 × 35
(W × H × D, mm), Mounting depth approx. 20
mm
approx. 200 g
approx. 210 g
Operation 0...+50°C, storage -10...+50°C
max. 95% RH, avoid condensation
21,6...26,4 V DC.
A suitable power pack can be purchased from
Elsner Elektronik.
approx. 10 mA
• approx. 2.7 W maximum (when ambient
lighting 100% white, display brightness
100%)
• approx. 2.0 W in normal operation (when
ambient lighting off, display brightness 50%)
• approx. 1.4 W in standby operation (when
ambient lighting off, display off)
(was measured with 24 V auxiliary voltage)
• approx. 3.5 W maximum (when ambient
lighting 100% white, display brightness
100%)
• approx. 2.4 W in normal operation (when
ambient lighting off, display brightness 50%)
• approx. 1.9 W in standby operation (when
ambient lighting off, display off)
• During startup briefly approx. 4.8 W (200
mA)
(was measured with 24 V auxiliary voltage)
KNX +/- Bus connector terminal
unit's own microcontroller
0
max. 1024
max. 1024
1022
Micro SD
4× Analog/digital,
max. cable length 10 m
-40°C...+80°C
IEEE802.11b/g/n, 2.4 GHz or 5 GHz
64/128-bit WEP, WPA-PSK, WPA2-PSK
The device may only be used as a fixed-site installation; that means only when as-
sembled and after conclusion of all installation and operational start-up tasks and
only in the surroundings designated for it.
Elsner Elektronik is not liable for any changes in norms and standards which may
occur after publication of these operating instructions.
2.2. Installation
2.2.1. Assembly site and assembly preparations
The device must only be installed and operated in dry, indoor
spaces. Avoid condensation.
ATTENTION!
The WLAN range for the Corlo Touch KNX 5in WL model can
be reduced as a result of the position where it is installed.
Consider this when planning the location.
Avoid direct light (sunlight, lights) when choosing the assembly site. The proximity
sensor's function can be impaired by strong light sources.
Choose the assembly height based on the application in each case: When used as
a switch, the Corlo Touch KNX 5in should be mounted 110 cm above ground le-
vel and when used as an indicating and control display, at a conveniently legible
height, say 150 cm.
The Display Corlo Touch KNX 5in is installed in a junction box (R 60 mm, depth
42 mm).
2.2.2. Wall mounting
Fig. 1
A socket with 4 screw domes faciliates in-
stallation.
Fig. 2
Bolt the mounting unit on to the socket.
The arrow („TOP") must point upwards.
Two screws (right/left or top/bottom) are
TOP
enough.
Fig. 3
If the screw domes of the box used are
not covered with the mounting unit's lon-
gitudinal holes, the mounting unit can al-
ternatively be bolted via the other holes
(e.g. for other installation systems).
Fig. 4
Example: Boxes from Swiss systems.
Connect KNX bus, auxiliary voltage and where required the connection line inputs
to the display unit.
Fig. 5
The display unit can now be put in place.
The arrow placed on the back („TOP")
must point upwards.
Fit the display unit at the top first and
then engage it at the bottom.
Fig. 6
Fix the display unit from below with the
supplied screw (A).
A
Fig. 7
To remove the display unit from the
mounting unit, loosen the screw (A).
Press against the lower notches (B) to re-
lease the connection. The display unit can
be removed.
B
A
B
1