Cayken SCY-1300RE Betriebshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Bohrer Cayken SCY-1300RE herunter. Cayken SCY-1300RE 10 Seiten.

Seite drucken
Operation Manual
WARNING
To pre ent electric shock or fire please strictly abide by the procedures in the
,
operation manual
.
The machine only for the specialized persons please do not let other people to
operate If any iolation of the instructions operation and cause personal in ury
.
or machine damage our company disclaim all responsibility
,
The machine can only maintain by the people who has the certification
THANKS TO YOU BUYER
Great thanks for buying the series of diamond drill of
operation manual and must pay attention to safety precaution
The right operation will make you fully feel our products superior performance
,
lease put this manual in a safe place for future reference

ABOUT THIS MANUAL

The machine model of the description in this manual:
The machine model of the description in this manual:
SCY: 1300/1300E/1300RE/1600/1600E/1600RE
SCY: 2300/2300E/2300RE/2800/2800E/2800RE
SCY: 3200/3200C/3200RC/3200RTC/3800/3800C/3800RC/3800RTC
SCY: 4900/4900C/4900RC/4900RTC/6000/6000C/6000RC/6000RTC
SCY: 8000/8000C/8000RC/8000RTC/1000/1000C/1000RC/1000RTC
Confirm the machine model according to the nameplate.
Shanghai Chengxiang Electromechanical Equipment
Co., Ltd. reserves the rights of final explanation.
,
.
.
C
AYKEN
.
lease read
.
.
.
agnetic
agnetic
agnetic
agnetic
3
3
-
-
hase
hase
agnetic
agnetic
3
3
-
-
hase
hase
agnetic
agnetic
3
3
-
-
hase
hase
agnetic
agnetic
www.cayken.com.cn
C
AYKEN
PROFESSIONAL DRILLING
DESCRIPTIONS OF PRODUCTS
agnetic drill is a kind of electric tool for adhering and drilling on the horizontal le el side
face and top face and widely used in the building bridge building and ship building industries
,
and so on ou can use the magnetic drill when you can not use drill press and electric hand
.
drill to drill huge steel workpieces or in field operation It s ery con enient to use flexible
can reduce labor intensity impro e the machining precision and work efficiency
CAUTIONS
1 lease read the manual carefully before use to understand the magnetic base drill structure
.
electromagnetic sucker electric drill and transmission functions
2 efore installing or remo e the drill must confirm the motor switch is closed and the plug
.
3 sing a drill bit after clamping key wrench must be remo ed while the drill must be sharp
.
for
orse taper shank drill should pay attention to the flat iron tail at the cone slee e waist
groo e insert cone slee e emo e the drill the inclined flat iron is inserted on the oblique
iron ust bit dropping hammer slee e waist groo e
4 nd its operation must be put in the fuselage behind the cable away from the drill bit
.
5 In the switching power supply electric and magnetic switch must be in the off position
.
6 rilling machine must be used when using engine coolant The use of cooling liquid soap
.
according to the ratio of uishui absolutely can not direct water cooling
easy to damage and the main internal rust on the drill bit can t get it out
,
ine water otherwise it will burn the circuit board
,
rill
rill
7 uch as the use of the stepless speed regulation models of constant power o erload prote
.
rill
rill
ction the machine during use motor suddenly stop functioning then in the function of o er
,
load protection de ice the steps are as follows
rill
rill
minutes
,
weight of the plug then open the motor
rill
rill
8 The use of magnetic base drill must wear a seat belt buckle
.
rill
rill
9
.
o rough operation personnel feed can not handle in order to work fast and pressed down
the machine feed so lossy bit and machine
,
10
.
on magnetic materials can not drill with magnetic base if the non magnetic material
-
punching need to choose the magnetic base drill with sucker
11 Cannot use at the same time electric welding machine and magnetic base drill on the same
.
piece of steel plate so that the operating personnel from electric shock danger
Warning: magnetic drill equipped with a safety rope, when operating, make sure the magnetic
drill and the object is fastened by the rope.In case of power failure suddenly, causing
the machine fall off or thrown objects and cause accidents.
9
10
www.cayken.com.cn
,
.
,
,
,
,
,
.
,
.
,
.
,
.
,
,
: ,
turn off the power switch paused for a few
,
.
,
.
,
,
,
,
,
,
,
,
.
.
.
,
,
(
)
.
therwise ery
.
o internal mach
-
,
,
-
.
.