Cayken SCY-18/2EBM Gebrauchsanweisung - Seite 4
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Bohrer Cayken SCY-18/2EBM herunter. Cayken SCY-18/2EBM 9 Seiten.
Seite drucken
8. Avoid abnormal posture. Care for safe standing and keep the balance anytime. Do not
work on a ladder. Thus you can control the electric tool better in unexpected situations.
9. Wear suitable clothing. Do not wear wide clothing or jewelry. Keep hair, clothing and
gloves away from moving parts. Wide clothing, jewelry or long hair can be caught by
moving parts.
10. Do not overload the device. Use the appropriate electric tool for your work. With the
appropriate electric tool you work better and saver in the declared range of performance.
11. Do not use an electric tool whose switch is damaged. An electric tool which can not be
switched on and off is dangerous and has to be repaired.
12. Unplug the plug from the socket before carrying out instrument settings, exchanging
accessories or put the device aside. This safety measure avoids the unintended start of
the electric tool.
13. Keep unused electric tools out of reach of children. Do not allow persons to use the
device who are not familiar with it or have not read these instructions. Electric tools are
dangerous if they are used by inexperienced persons.
14. Voltage: please be attention that the power voltage should be no more than + 5% of
rated voltage. Higher voltages however can cause irreparable damages. Please note that
when operating the machine via a generator, this does not generate higher voltage
peaks.
PRODUCT STRUCTURE
7
8
6
5
4
3
2
1
Instructions for hand-held drills：
1. Sild handle
9
2. Flush water valve
3. Motor spindle
4. Water ring assembly(External)
5. Power switch
6. Main handle
7. Soft start the overload
8. Motor assembly
9. Plastic shoulder rest
Wear hearing protection when operating the machine
Use the auxiliary handles that are supplied with the device
Hold the handle while operating the machine
OIL IMMERSED ADVANTAGES
Oil immersed type diamond drilling machine is a kind of drill for the reinforced concrete, brick,
stone, ceramic and refractory materials, It is Suitable for equipment installation, installation of
water and electricity, tunnels and other construction, installation. Oil immersed type diamond drilling
machine gear oil has a very good pressure, when gear meshing friction surface temperature is high
enough, It can react chemically with the gear surface, form metal film strength strong critical shear,
preventing gear surface wearing.
The friction losses, greatly improving the service life of the gear. The bearing capacity of gear oil is
high, is conducive to the tooth surface protection. At the high temperature it can guarantee the reliable
lubrication of the gear. Viscosity temperature performance is good with the variation of working
temperature, it ensures a sufficient liquidity at low temperature, ensure the liquid oil to the tooth
surface and bearing friction loss, prevent,Injury. In the high temperature viscosity does not decrease
too much, can form a lubricating oil sufficiently thick enough.
Attention: Our company does not assume any responsibility because the machine
is not solid or fixed safety facilities are not in appropriate place cause accident.
SPECIFICATION
Product model
MOD.
18/2EBM
26/3EBM
1520/3BS
1520/3EBS
1780/3BS
1780/3EBS
2020/3BS
2020/3EBS
90/2BS
105/3BS
Notice: In order to constantly improve products, our company reserves the right to change
technical data without prior inform.
3
4
Brick drilling
Concrete drilling
Rated voltage
Input power
range mm
range mm
V
W
132
80
110/220~
1900
100
110/220~
2300
165
150
100
110/220~
1800
150
100
110/220~
1800
180
125
110/220~
1900
125
110/220~
1900
180
200
150
110/220~
2100
200
150
110/220~
2100
90
50
110/220~
1800
76
110/220~
2100
105
Rated
No-load speed
frequency
rpm/min
Hz
50-60
720-1230/1780
50-60
530- 720/1220/1300
50-60
700/2770
50-60
100-700/ 2770
50-60
700/1500/2980
50-60
100-700/1500/2980
50-60
590/1310/2730
50-60
100-590/1310/2730
50-60
770/2770
50-60
590/1310/2730