Cayken SCY-2020/3EBS Gebrauchsanweisung - Seite 3

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Bohrer Cayken SCY-2020/3EBS herunter. Cayken SCY-2020/3EBS 9 Seiten.

Seite drucken

WARNING

To prevent electric shock or fire

please strictly abide by the procedures in the

operation manual

The machine only for the authorized persons

operate

If any violation of the instructions operation and cause personal injury

or machine damage

our company disclaim all responsibility

The machine can

only maintain

by the people who has the certification

THANKS TO THE BUYER

Thanks for buying the series of diamond drill

the operation manual and pay attention to the safety precaution.

The right operation, will make you fully feel our products superior performance.

Please put this manual in a safe place for future reference.

ABOUT THIS MANUAL

The machine model of the description in this manual:

Mod.: 18/2EBM、18/2PA、26/3EBM、1520-3BS/1520-3EBS、1780-3BS/1780-3EBS

2020-3BS/2020-3EBS、90/2BS、105/3BS

Confirm the machine model according to the nameplate.

please do not let other people to

machine

. Please read

HAMMER DRILLING USE

This drilling machine is designed for either wet or dry core drilling in masonry, concrete

and similar types of materials. It is equipped with a 2 speed gearbox which allows mechan-

ical selection of 2 speed ranges forideal drilling with either small or large diameter core bits.

In addition, the motor is equipped with feedback electronic speed stabilization which works

to keep the rotation speed the same, regardless of load.There is a variable speed function

which is controlled by a thumbwheel. There is soft start and electronic overload protection

and also a mechanical slip clutch for safety.There is provision for both impact drilling and

standard drilling functions. Selection between impact and standard drilling is made with a

selector tab on the top of the gearbox.

SAFETY PRECAUTION

◆ Read all precautions before operation and keep it forever.

◆ Please follow the operating instruction strictly, failures in the compliance with these

safety precautions and instructions can cause electric shock, fire and/or heavy injuries.

1. Keep your working area clean and well illuminated. Disorder or unilluminated working

areas can cause accidents

2. Do not work in explosive ambiances with the electric tool, beacuse there are flammable

liquid, gases or dusts. Electric tools generate sparks which can inflame the dust or vapors.

3. Keep children and other persons away from the electric tool while using it. When being

distracted, you can lose the control on the device.

4. Be attentive, pay attention to what you do and go to work with the electric tool with

reason. Do not use an electric tool when you are tired or under the influence of drugs,

alcohol or pharmaceuticals. One moment of carelessness while using an electric tool can

cause serious injuries.

5. Wear personal protective equipment and always goggles. The wearing of personal prot-

ective equipment, like dust mask, skid-proof shoes, protection helmet or hearing protect-

ion, reduces the risk of injuries.

6. Avoid unintended start up. Make sure that the electric tool is switched off before conne-

cting it to the electricity. When you have your fin-ger on the switch while carrying the

electric tool or connect the device to the power when it is switched on, this can cause

accidents.

7. Remove adjusting tools or wrenches before switching on the electric tool. A tool or wre-

nch which is located on a turning device can cause injuries.