Cayken SCY-2550 Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Bohrer Cayken SCY-2550 herunter. Cayken SCY-2550 19 Seiten.

sharpened or feeding

speed is too fast, please pull out the drill bit then re-feed. If the motor stop when

drilling, please return on the machine and slow down the feed speed.

FRICTION CLUTCH

The integrated friction clutch protects operating personnel,whenthe machine and

the tool against high mechanical overloads,please ensure that the release time of the

clutch is not more than 3-4 seconds,otherwise wear and heat will increase rapidly.

After having switch on the motor starts softly.If the machine is being overloaded,the

motor electronic switchs over to the pulsating operation for showing the operator the

overload.If the force is then not reduced,the motor switches off after a few seconds.After

switching the machine off and on again,the motor start again softly.Before switching the

machine on again,ensure that the drill bit can be turned easily and is not jammed in the

drill hole.The motor can bear highest on 260 Volt.Higher voltages however can cause irr-

eparable damages.Please note that when supply power via a generator,this does not ge-

nerate higher voltage peaks than 260V.

Gear change

Three

Two

Oil bath

Three

Two