Cayken SCY-98HD Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Bohrer Cayken SCY-98HD herunter. Cayken SCY-98HD 8 Seiten. Industrial equipment
Seite drucken
All drill must add the corresponding diameter thimble, thimble, thimble penetrates into the
bit must be sharp, long out of more than 12 mm, and the thimble after a period of time must be
replaced.
AUTOMATIC FEED MAGNETIC
1>AUTOMATIC FEED MAGNETIC SPECIFICATIONS
Specifications
KCY-55QE
Core Cutter
55
mm
Twist Drill
23
mm
Voltage
110/220~
V
Magnetic Adhesion
16800
N
Input
1780
W
Load
550
rpm
Tool Holder
3#
Tool Holder
Notice In order to constantly improve products, our company reserves the
:
right to change technical data without prior inform.
2>
AUTOMATIC FEED MAGNETIC
Automatic feed has the function of automatic feeding and manual feed the magnetic base
drill, and high efficiency, without operation feed. The feed speed with stepless speed regulation,
force uniform can realize motor protection tool.
3>AUTOMATIC FEED MAGNETIC APPLICATION
Automatic feed magnetic base drill handle to the machine direction pushing this time for
the automatic feed state, as the manual feed state vice handle to launch angle. A speed control
function on the side panel of the machine, you can feed speed adjusted according to the size
and nature of the hard and soft bit. The amount of feed in general is about 0.005mm/ All drill
must add the corresponding diameter thimble, thimble, thimble penetrates into the bit must
be sharp, long out of more than 12 mm, and the thimble after a period of time must be replaced.
While drilling on the side face, we need two operators, and one guardian as well. Move the
machine to the workpiece, then plug in. Turn on the magnetic control switch until the magnetic
base fixed firmly(the operator need to hold the machine during this period), and then fasten
the safe belt in case of sudden dropping. Fit on the bit, rotate the handle to move the bit to
the workpiece and then turn on the motor switch to drill. Keep the load around 0.05mm/r.
Do not overexert in case of overload.
KCY-65QE
KCY-80QE
65
80
25
31
110/220~
110/220~
17200
17800
1980
2080
520
500
3#
3#
ADVANTAGE
MINI HORIZONTAL TYPE
1>MINI HORIZONTAL TYPE SPECIFICATIONS
Specifications
Core Cutter
mm
Voltage
V
Magnetic Adhesion
N
Input
W
Load
rpm
Split type with ※.
Notice In order to constantly improve products, our company reserves the
:
right to change technical data without prior inform.
2>
MINI HORIZONTAL TYPE
Mini horizontal magnetic base drill has the body short, small volume, light weight and so on.
Can the transverse and longitudinal operation in narrow space.
3>MINI HORIZONTAL TYPE APPLICATION
Mini horizontal type while drilling on horizontal level, move the machine to the workpiece,
then plug in. Turn on the magnetic control switch, fit on the bit after the magnetic base fixed
firmly, and then rotate the handle to move the bit to the workpiece. Turn on the motor switch
to drill. Keep the load around 0.05mm/r. Do not overexert in case of overload.
While drilling on the side face, we need two operators, and one guardian as well. Move the
machine to the workpiece, then plug in. Turn on the magnetic control switch until the magnetic
base fixed firmly(the operator need to hold the machine during this period), and then fasten
the safe belt in case of sudden dropping. Fit on the bit, rotate the handle to move the bit to
the workpiece and then turn on the motor switch to drill. Keep the load around 0.05mm/r.
Do not overexert in case of overload.
.
All drill must add the corresponding diameter thimble, thimble, thimble penetrates into the
bit must be sharp, long out of more than 12 mm, and the thimble after a period of time must be
replaced.
11
12
KCY-28DM
KCY-38DM
25
38
110/220~
110/220~
10000
11000
1400
1650
650
600
ADVANTAGE
KCY-55DM
55
110/220~
11500
1900
550