Dust Right 650 CFM Anleitung Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Staubabscheider Dust Right 650 CFM herunter. Dust Right 650 CFM 8 Seiten. Wall-mount dust collector
Auch für Dust Right 650 CFM: Gebrauchsanweisung (8 seiten)

Seite drucken

PRODUCT SPECIFIC SAFETY WARNINGS CONTINUED

Safe Use (continued from p. 3)

> Close attention is necessary when used by or near children.

> Use only as described in this manual. Use only

manufacturer's recommended attachments.

> Do NOT hang from the machine or allow anyone else

to do so.

> For the unit to operate, the safety key must be inserted

in the Main Power Switch. It can be removed to prevent

unauthorized use.

Installation/Assembly

> Do NOT install the Dust Right 1250 CFM Wall Mount Dust

Collector outside the work area, especially if the work area

contains a gas-fueled appliance. In drawing the air outside,

the dust collector could lead to a buildup inside the work

area of combustion gases – including deadly carbon

monoxide – that normally are vented from

gas-fueled appliances.

> The Z-Bracket used to mount the Dust Collector must

be secured using all three included #10 x 1

Screws (11) driven into solid wood cleats securely

attached between structurally sound wooden wall

studs (in applications with open framing) or across

structurally sound wall studs (in finished-wall applications).

All cleats spanning wall studs must be long enough that

both ends of the cleats can be attached to studs.

⁄

" Wood

SAVE THESE INSTRUCTIONS

> Do NOT use wall anchors or drywall anchors to mount

the Dust Collector.

> To prevent damage to the power cord, select a mounting

location for the Dust Collector that will keep the cord out

of high-traffic areas.

> Do NOT lift more than you are able. If the Dust Collector

motor assembly feels too heavy for you to lift on you own,

obtain the help of another adult to lift the unit into position.

Use proper lifting techniques.

> After assembly or maintenance, make sure that you

have removed all loose tools from the machine before

turning it on.

Maintenance

> To avoid injury from accidental starting, turn the unit off and

unplug power cord before changing or cleaning dust bag

or before any other servicing.

> Periodically inspect dust and filter bags for any cuts, rips

or tears. Do NOT operate the dust collector with a damaged

bag or hose.

> Empty bag regularly. Do NOT fill the bag more than half-full.