CB Tech WaterBox Betriebshandbuch - Seite 18

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Water Filtration Systems CB Tech WaterBox herunter. CB Tech WaterBox 20 Seiten. Mobile water filtration system

Seite drucken

F. Troubleshooting

 Check position of power switch on the electrical control box.

 Switch power OFF (to reset a tripped circuit breaker) and then

back ON to attempt restart.

 Verify that power source is generating the correct voltage.

Pump does

 If using AC power (115 VAC/230 VAC), cycle the GFI switch by

not run

pressing "Test" button followed by the "Reset" button.

 Disconnect your power source and check for loose pump wiring

plug from power supply control box.

 Check height of pump above water source. If height is greater

than 8' (2.4m) pump must be manually primed.

 Confirm that inlet hose, outlet hose, and water intake are free

from obstruction.

Pump does

 Confirm that pump inlet strainer is clear of debris. (If clogged,

not prime

unscrew cap, remove and wash mesh screen.)

(No Suction)

 Check all plumbing connections for leaks.

 With the pump turned on, press and hold the air pressure relief

valve on the first Stage I filter until the pump is primed.



 Confirm that the suction and discharge hoses are free from

obstruction.

Waterbox

 Confirm that all of the air is bled from the system.

produces less

 Confirm that the pump intake strainer is clear of debris. If

than 0.5 gpm

clogged, unscrew clear housing remove debris and (if needed)

flow rate

gently scrub the stainless steel screen.

 Check all plumbing connections for leaks.

 Safely verify that the pump is not overheating.

Verify (via pressure drop) that the filters have not reached their

useful life

Page 18 of 20