CB2 FUEL Montageanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Montageanleitung für Inneneinrichtung CB2 FUEL herunter. CB2 FUEL 5 Seiten. Credenza

Seite drucken
CB2 FUEL Montageanleitung
fuel
CREDENZA
B
partition
A. Insert 4 wood dowels and 2 cams into left
and right side panels as shown. Make sure
arrows on each cam points toward nearest edge
with holes.
B. Insert 4 wood dowels and 2 cams into
1
partition as shown.
NOTE: Make sure grooves
of side and top panels are
assembled on the same side
right side
panel
top
panel
Fit dowels of left/right side panels and partition
into corresponding holes of top panel as shown.
Using a screwdriver, turn each cam clockwise
3
until it securely engages each cam screw.
Made in Vietnam - r06
NOTE: Make sure arrows
on each cam points toward
nearest edge with holes
left and right
A
side panels
NOTE: Make sure
arrow label on partition
points toward the front
during assembly
left side
partition
panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
NOTE: Do not over
tighten the cam screws
top panel
Insert 6 cam screws into top panel as shown.
Secure, but do not over tighten, screws using a
2
phillips head screwdriver.
Slide back panel into corresponding grooves of
4
left/right side panel and top panel as shown.
back
panel
Page 2 of 5