CB2 LINEAR Montageanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Montageanleitung für Möbel CB2 LINEAR herunter. CB2 LINEAR 5 Seiten. Tall chest
Auch für CB2 LINEAR: Montageanleitung (4 seiten), Montageanleitung Handbuch (11 seiten)
Seite drucken
linear
LOW DRESSER
NOTE: Do not over
tighten the bolts.
right side
panel
top panel
With the assistance of another adult, carefully
place top panel upside down onto a clean,
padded surface. Fit pre-assembled dowels of left
and right side panels into corresponding holes of
top panel. Secure left and right side panels to top
panel with 2 flat washers, 2 spring washers and
2 large bolts as shown. Secure, but do not over
1
tighten bolts using a phillips head screwdriver.
Slide back panel into grooves of left and right
3
side panels.
Made in Vietnam - r05
NOTE: Make sure left
and right side panels are
assembled with grooves
facing back as shown
left side
panel
back panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Fit pre-assembled dowels of partition into
corresponding holes of top panel. Secure partition
to top panel with 2 flat washers, 2 spring
washers and 2 large bolts as shown, using a
2
screwdriver.
bottom panel
Carefully place bottom panel onto a clean,
padded surface. Attach 5 legs to bottom panel
with 4 small bolts as shown. Secure, but do not
4
over tighten the bolts using an allen wrench.
partition
Page 2 of 5