4KDVB CV-F01-RX Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Extender 4KDVB CV-F01-RX herunter. 4KDVB CV-F01-RX 4 Seiten. Fiber optic extender

Seite drucken
Dial up is "OFF", the corresponding number is "1"; dial down is "ON", the corresponding
number is "0".
DIP switch operating instructions as shown in Table 1.
The
DIP
Dial both switch 1
and switch 2
Dial both switch 3
and switch 4
Table 2 Setting of DIP switch and the corresponding output standard
Output Standard
NTSC-443
PAL_I
NTSC_M
PAL_D
3. Indicator Light
Light State
L1 flash
The CV-F01-RX
Description
works normally.
4. Audio Output
The CV-F01-RX supports one analog audio output. Please note that audio can not be
transmitted separately.
5. Serial Port Function
Contrast, brightness and saturability of image can be configured through the serial port.
6. Applying power
First, please make sure that all the connection is fine.
Second, make all the configuration completed according to your specific needs.
Third, applying stable
CV-F01-RX User Manual
Table 1 DIP switch operation instruction
Item
Function
Applying Condition
Operation
Function
Applying Condition
Operation
Dial Switch 1
ON
ON
OFF
OFF
Table 3 Indicator light and signal state
L2 on/off
on: Fiber optic signal input
off: No fiber optic signal
input
12V/2A
power to both the transmitter and the receiver.
Description
To set CVBS output standard.
Before applying power to the CV-F01-RX or
during the service of the item.
The dialing combination of the DIP switch
and the corresponding output standard as
shown in table 2.
No Function. Both up and down is permitted.
Dial Switch 2
ON
OFF
ON
OFF
on: PAL standard output
off: NTSC standard output
2
—
—
Corresponding
Binary Code
00
01
10
11
L3 on/off