CBC HSS-H37 Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Digitalkamera CBC HSS-H37 herunter. CBC HSS-H37 5 Seiten. Security height marker camera

12. Feed external wiring for power and video into base frame through rear hole or conduit knockout.

If top knockout is used, the wire must feed through it and cover retained loosely until final step of installation.

13. Attach video and power. A 2.1mm barrel power connector is provided; the striped lead is for 12VDC+. Connect

leads with butt splices or wire nuts. Use cable tie mounts and ties to secure and strain relieve connections.

14. Adjust camera field of view by loosen white knurled nut below camera bracket and rotating camera assembly

to desired position.

15. Place cover over base frame about 3/4" inch above bottom of frame. With light pressure, push toward base

and down until cover is seated against bottom of frame and cover is secure.

16. Place top cover plate in position and tighten screw with light pressure. Do not over torque.

3. On-Screen-Display (OSD)

The camera's capabilities can be set-up for best performance based on a variety of lighting condition and other

functional requirements by means of an OSD menu. The OSD menu can be activated and controlled by means of

the mini-joystick dongle attached to the camera and mounted to the back frame of the camera case. For the

specific functions of the camera accessible through the OSD menu, refer to the Effio-E Menu addendum sheet

found in the installation hardware kit.

4. SERVICE

If the unit ever needs repair service, the customer should their dealer or manufacturer's Sale Representative.

5. CARE AND MAINTENANCE

If the unit needs cleaning, use a soft damp cloth to wipe the external cover.

Confidential

Page 5