Dustless DUST SHROUD PRO Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Elektrowerkzeug-Zubehör Dustless DUST SHROUD PRO herunter. Dustless DUST SHROUD PRO 2 Seiten.

Seite drucken

SETUP

1. Loosen Clamp.

2. Place on collar of grinder.

3. Center Dust Shroud on arbor and tighten

clamp.

4. Install spacer if needed.

5. Install grinding wheel.

6. Insert hose in Dust Shroud Pro port.

7. Attach to vacuum.

USAGE

Front clip slides out so you can use it against

a wall. Note: Always make sure grinder is

UNPLUGGED when removing or attaching

clip.

Dust Shroud Pro comes with a clip mount (7" only).

WARNING

- If using this product in the

removal of lead paint a Dustless HEPA

vacuum must be used. The removal of

old paint may generate dust or fumes that

contain lead. Exposure to lead may cause

brain damage or other adverse health

effects, especially in young children and

pregnant women. Follow all federal, state and

local laws including the U.S. Environmental

Protection Agency's Renovation, Repair and

Painting law or similar state law.

SUPPORT

www.dustlesstools.com

OM019_0417