CBE DS-300 Gebrauchsanweisung - Seite 5
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Bedienfeld CBE DS-300 herunter. CBE DS-300 13 Seiten.
Seite drucken
1
2
3
C APTIONS
1)
Test button to check both internal and external temperature and to set the clock.
2)
Test button to check the voltage of the car battery(B1) and leisure (B2) battery and to set the clock.
3)
Test button to check the level in % of the drink and waste water tank and to set the clock.
4)
Awning light switch, it switches automatically off when you star tup the engine
5)
Main switch (see minimal voltage control).
6)
Water pump switch.
7)
Lights main switch.
8)
Digital displaying of the clock and the required test.
9)
It shows the starting up of the battery parallel when the engine is started.
10)
It shows the car (B1) battery test, the blinking means run-down battery alarm.
11)
It shows the leisure (B2) battery test, the blinking means run-down battery alarm.
12)
It shows the battery recharging through engine alternator.
13)
It shows the test or alarm batteries together with the symbols 10 or 11.
14)
It shows the connection to the 230V net.
15)
It shows that the minimal voltage device has switched on.
16)
It shows the drink water and auxiliary tank test, if blinking shows the alarm of empty drink water or
auxiliary tank.
17)
The blinking means full tank alarm.
18)
It shows the unit of measure: U=Volt, °C and temperature reference I=int. temperature, E=ext.
temperature.
NOTE: The watch is supplied from the leisure battery (B2).
Should B2 be disconnected, the watch is able to keep working, without visualization, for about 2
weeks.
TANKS SETTING
NB: do not modify the dip-switches' position of the picture.
CONTROL PANEL "PC-200"
G
8
9
10
11
12
13
14
15
16
17
12
18
.
4
5
6
7