Datamars COMPACT MAX Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Haustierpflegeprodukt Datamars COMPACT MAX herunter. Datamars COMPACT MAX 10 Seiten. Microchip scanner
Auch für Datamars COMPACT MAX: Schnellstart-Handbuch (4 seiten)
Seite drucken
6 Do you have a problem identifying an animal?
6.1
The reading distance is too short
The maximum reading distance is obtained with the transponder (TAG) perpendicular to the antenna and
aimed at the center of the antenna coil. If the tag is implanted into an animal its orientation may not be
optimal and therefore the reading distance may be reduced.
You might be close to a source of electromagnetic disturbances like video or TV. Move a few meters away
and try again.
Do not use the reader on a steel table. The metal will reduce the performance of the antenna.
The reading distance is reduced if the transponder is still in the needle.
6.2
The reader does not read the transponder
Change the angle of the reader and try again.
Some types of transponders from other manufacturers are disturbed if placed in the center of the reader-
antenna. It is possible that some tags will not function if placed in parallel and at the center of the antenna.
Change the direction of the tag or of the antenna.
6.3
The reader does not work
Check the temperature: it has to be between -10ºC and +55º C.
If you're still having problems, please contact your dealer.
The COMPACT MAX reader is a product developed and produced by DATAMARS, Switzerland.
If you have any suggestions or require information regarding this or other DATAMARS products, please
contact your dealer.
7 Information to user
7.1
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures.
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
COMPACT MAX Reader User Manual
8
05.08.2014