Dutchess 270 Betriebsanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Küchengeräte Dutchess 270 herunter. Dutchess 270 9 Seiten. French bread/bun & bagel slicer

Seite drucken

INTRODUCTION

Many hours of engineering design and performance testing have gone into your Dutchess Model

270 French Bread/Bun & Bagel Slicer. With proper care and maintenance this machine will give

you efficient performance and convenient operation throughout its long life.

Safety and reliability are engineered into all Dutchess equipment. We urge machinery operators

to study the safety section of this manual and to learn how to operate and maintain the equip-

ment correctly.

This manual has been made for your convenience and instruction. Keep this book on file

and always include Model Number and Serial Number of the machine when ordering parts.

Read and understand all instructions and safety practices before attempting operation!

Pay particular attention to Warning and Caution messages indicating personal safety instruc-

tions. Failure to comply with safety instructions may result in personal injury.

ELECTRICAL CONNECTION

Electrical specifications for your machine are printed on the Serial Number tag which is located

near the electrical power cord point of exit on the machine. Be sure to check your plant voltage

with the voltage specified on the machine.

(Refer to page 9 for additional electrical information)

A properly grounded receptacle is required for safe operation regardless of the voltage require-

ments.

CUSTOMER SERVICE

If you encounter a problem with your Dutchess Model 270 French Bread/Bun & Bagel Slicer,

refer to the Cleaning & Maintenance, or the Troubleshooting sections of this manual. If you

cannot quickly resume normal operation, contact Dutchess Customer Service (715) 394-2387.

You must have Model and Serial Number of unit Before Calling!

WARNING:

TURN THE MACHINE OFF AND

DISCONNECT THE POWER SUPPLY

BEFORE PERFORMING ANY TYPE OF

SERVICING, CLEANING, MAINTENANCE

OR INSPECTIONS.

The Blade on the Model 270 Slicer will coast

to a stop after the power is switched off. To

prevent personal injury or possible damage

to the Slicer components, wait for the

Blade to stop completely before making

any adjustments.

WARNING: