Dataprobe iBoot-PoE Schnellstart-Handbuch

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Schalter Dataprobe iBoot-PoE herunter. Dataprobe iBoot-PoE 3 Seiten. 1g poe extender with auto reboot

Seite drucken

Hardware Connections

PoE Switch or

PoE Injector

iBoot-PoE-P supports 10/100/1000 Ethernet using the cable supplied, or

other suitable unshielded twisted pair (Cat 5-6) cabling.

Power is derived from either the PSE, such as a PoE Network Switch or a

PoE Injector. The iBoot-PoE-P supports 802.3af Mode A, Mode B and

4PPoE wiring specifications, 9 – 72 VDC.



Connect the PoE OUT connector to the PoE Device to be

controlled (PD); Camera, Access Point, Phone, etc.



Connect the NET IN connector to the PoE Power source (PSE);

PoE Switch, Midspan or Injector.

PINS

Voltage on Spare Pins

Power Output on the PoE OUT connector will be identical to whatever mode is used on the NET IN

connector.

iBoot-PoE-P Quick Start Guide

Mode B

Mixed Data and Voltage

DC +

DC -

V180802N

Quick Start Guide

Mode A

(802.3bt Type 3 / 4 Draft

DC +

DC -

4PPoE

D1.2)

Voltage on all pins

DC +

DC -

DC +

DC -