DV Mark DV40 212 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrumenten-Verstärker DV Mark DV40 212 herunter. DV Mark DV40 212 8 Seiten.
Auch für DV Mark DV40 212: Benutzerhandbuch (11 seiten)

Seite drucken
13) PRESENCE The Presence knob (common for CH1 and CH2) controls high frequencies, above those controlled by the High knob on each
channel. It's an effective and useful part of the amp's tone controls. Turn the Presence up for crisp, sparkling clean sounds, crunchy rhythm
sounds and aggressive riffs; lower it for darker, rounder sounds and focused single-note lead tones.
14) REVERB Level control for the onboard reverb (common for CH1 and CH2). This amp features a last generation of digital reverb, it's
sweet-sounding, warm and natural. Reverb ON/OFF can also be controlled by a DUAL footswitch that can be plugged into the amp's rear panel
(20).
15) STANDBY Before powering on, make sure this switch is in standby position.
When you turn on the power, make sure this switch is in standby position for about 30 seconds. Between sets or whenever you're on a break
from playing, put the amp in standby position, this will extend the power tubes life.
16) POWER This switch delivers AC power to the amp. Make sure the unit is grounded; all three terminals of the AC power plug must be
connected to avoid any injury to the user or damage to the unit.
The DV Mark Little 40 II amp, the DV 40 112 and the DV 40 212 combos feature a 120V/240V Voltage Selector to use the amp in countries
with different voltages, so make sure the switch on the rear panel is on the correct voltage before connecting it to the AC power, and the fuse
is the right value for that voltage. Follow the procedure described in the STANDBY section above (15) before powering up your amp.
LITTLE 40 II
3
4
5
BASS
MIDDLE
HIGH
7
Ch2
Ch1
CH1
0
MAX
0
MAX
INPUT
GAIN
MASTER
1
2
6
22
23
13
9
10
11
PRESENCE
BASS
MIDDLE
HIGH
0
MAX
STAND BY OFF
CH2
15
0
MAX
0
MAX
0
MAX
REVERB
GAIN
MASTER
14
8
12
ON
16
ON
5