ausdom AD282 Gebrauchsanweisung - Seite 7
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Dash Cameras ausdom AD282 herunter. ausdom AD282 16 Seiten.
Seite drucken
Memory Card
Picture 5
Picture 6
2.Press
button to enter menu configurations, press the
or
button to select format item and press
button to start formatting the
memory card. (Refer to Picture 6)
Note:
-Make sure the memory card has been formatted before the initial using.
-Do not remove the memory card during recording and firmware updating.
-You have to insert a memory card into the unit before connecting the
unit to the power supply.
3.To remove the memory card, just push to eject memory card out of
the slot.
Connecting to Power
1.Connect the small end of the power/transmission cable to the USB
connector located on the side of the unit.
2.Connect the other end of the power/transmission cable to the
supplied car charger. (Refer to Picture 7)
Charging Cable
Car Charger
Picture 7
Picture 8
3.Plug the supplied car charger into the car's lighter socket. (Refer to
Picture 8)
4.The unit will power on and start recording automatically once you
start the car engine.
EN 6