Datasensor SVS1 Kurzanleitung

Blättern Sie online oder laden Sie pdf Kurzanleitung für Zubehör Datasensor SVS1 herunter. Datasensor SVS1 2 Seiten. Vision sensor

Seite drucken
SVS1
Vision sensor
Quick guide
DESCRIPTION
The SVS1 series of vision sensors offers the easiest way to solve the most
common machine vision applications.
-
No PC needed
-
3.5'' LCD colour display configurator
-
640x480 image sensor
-
Compact IP54 housing
-
Red light LED illuminator
-
Selectable lens
-
Focus knob
-
Standard M12 connectors
ELECTRICAL CONNECTIONS
M12 8 poles
M12 8 poles
(VSC connection)
(power and I/O)
pin 1: white : digital input 1
pin 1: ethernet TX+
pin 2: brown : 24 Vdc
pin 2: ethernet RX+
pin 3: green : STROBE for ext. illuminator
pin 3: ethernet RX-
pin 4: yellow : output 1
pin 4: Not used
pin 5: grey : output 2
pin 5: 24 Vdc
pin 6: pink : output 3
pin 6: Not used
pin 7: blue : GROUND
pin 7: ethernet TX-
pin 8: red : external trigger
pin 8: GROUND
SVS-CV-VSC-xx
CS-A1-06-B-xx
HARDWARE CONNECTIONS
M12 8 Poles (Power and I/O)
Power:
Voltage: +24 VDC (22-26 VDC)
+Brown
Current: 300 mA max
+
24 VDC
-Blue
-
Red
Part Detect Signal Input:
Trigger ON: > 20 VDC
+
24 VDC
Trigger OFF: < 2 VDC
-Blue
-
Yellow
Output 1:
-Blue
Grey
Output 2:
-Blue
Pink
Output 3:
-Blue
White
Inspection Selection:
+
Signal ON: > 20 VDC
24 VDC
Signal OFF: < 2 VDC
-Blue
-
Green
External Illuminator Trigger:
Signal ON: 5 VDC
Signal OFF: 0 VDC
-Blue
SVS1 MOUNTING
The SVS1 sensor can be installed in many different ways.
A set of fixing accessories and brackets is available in the Datasensor
catalogue. For example:
Mounting Kit
U-shaped fixing bracket
VSC MOUNTING
All the accessories for VSC mounting are included in the package. The VSC
unit can be installed on a DIN rail or on a panel.
DIN RAIL MOUNTING
Locking clips
DIN Rail groove
Wedge the VSC unit in the DIN rail. First set the upper part of the monitor
and then press down the lower part.
When the VSC unit has been properly positioned on the DIN rail, fix it using
the two white lock wings.
PANEL MOUNTING
First, place the rubber seal around the VSC unit.
Rubber seal
Then fix the monitor on the panel using the two lock screws and the two
black caps.
Cap
Locking
screws
INDICATORS
From left to right
1.
Power, green;
2.
Digital output 2, yellow;
3.
Digital output 1, yellow;
4.
VSC connection status, green.
1.
Setting mode, green;
2.
Adjust mode, green;
3.
Monitor mode, green;
4.
Main menu, green;
5.
Power, green;
6.
Digital output 1, yellow;
7.
Digital output 2, yellow;
8.
Sensor connection status, green.
OPERATING DISTANCE PANEL
Field of View (mm)
Operating distance(mm)
SVS1-12-DC-X
SVS1-08-DC-X
SVS1-06-DC-X
50
17 x 12
25 x 20
80
25 x 20
40 x 30
110
33 x 25
55 x 40
140
45 x 35
70 x 50
170
53 x 38
85 x 60
200
60 x 50
100 x 70
300
90 x 65
145 x 103
400
121 x 82
186 x 132
500
150 x 110
236 x 167
600
185 x 130
282 x 232
TECHNICAL DATA
Supply voltage:
24 VDC ± 10%
Ripple voltage:
1 Vpp max with illuminator
2 Vpp max without illuminator
Consumption (SVS1 + VSC):
(excluding output current and
210 mA @ 24 VDC
illuminator)
Consumption with illuminator:
(depends on how long
300 mA @ 24 VDC
illuminator stays on)
Outputs:
3 PNP outputs
(short circuit protection)
VSC connection:
M12 8-poles A-code
Interface for external
Strobe signal (TTL)
illuminator:
Output current:
100 mA max
Output saturation voltage:
< 2 V
Optics:
Integrated
Resolution:
640 × 480 (VGA)
Dimensions:
69.8 × 51.5 × 40 mm (sensor)
96 x 96 x 39 mm (configurator)
Indicators:
4+8 LED + 3.5'' LCD colour display
Setup:
VSC configurator
Data retention:
Non-volatile FLASH memory
Operating temperature:
-10 °C ... +55 °C
Storage temperature:
-25 °C ... +70 °C
Vibration:
0.5 mm amplitude, 10 ... 55 Hz frequency,
for every axis (EN60068-2-6)
Shock resistance:
11 ms (30 G) 6 shocks for every axis
(EN60068-2-27)
Housing material:
Aluminium alloy / ABS
Mechanical protection:
IP50 (SVS1) / IP40 (VSC)
Connections:
2 x M12 8-poles A-code
Weight:
125 g (SVS1) / 170 g (VSC)
42 x 30
60 x 41
80 x 55
98 x 69
118 x 83
138 x 92
201 x 140
265 x 189
330 x 232
385 x 270