DV8 OFFROAD FS-15 Series Installationshandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge DV8 OFFROAD FS-15 Series herunter. DV8 OFFROAD FS-15 Series 16 Seiten. Rear bumper 20+ jeep gladiator jt
Seite druckenINSTALLATION
MANUAL
STEP 20 |
If equipped with factory
sensors, install bezels and sensors in
same orientation as OEM.
Depending on your specific vehicles
sensors, the sensor bezels may clip into
place very easily, or it may be necessary
to add a small amount of silicone to keep
the bezel in place.
STEP 21 |
Install the nut clips on the
upper mounting holes by pressing them
into place.
STEP 22 |
Route and secure the
wiring harness using zip ties. Trim zip ties
using snips for the cleanest look.
If the vehicle has a sensor wiring harness,
utilize the zip tie tabs located above the
bumper mount.
Ensure the wiring is safely secured and
will not be pinched when the bumper is
mounted.
NEED HELP?
855-680-9595