Convoy M7104 Handbuch für Besitzer und Installation - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Besitzer und Installation für Monitor Convoy M7104 herunter. Convoy M7104 6 Seiten. Lcd color monitor
Seite druckenOwner's / Installation Manual
Performance Series
Mounting the Monitor
1) Select a location allowing 2" space between monitor and walls, cabinets, or other objects to allow adequate air circulation
around it. Avoid enclosed spaces, areas with excessive vibration or subject it to severe impacts.
2) Never use this device in environments with excessive moisture, dust or smoke
pinched or stepped on. Monitor is not designed to be waterproof.
3) The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical system.
4) Make sure all cables are connected properly, observe polarity. Improper cable connections may damage the monitor. Remove
the power cable connections when you do not intend to use the unit.
Attach bracket to monitor here
Supplied Accessories
2, OR CAM 3 & CAM 4, OR ALL 4, OR 1-3. When the trigger wire is energized, the monitor automatically switches to view
THAT Camera. When voltage is removed from the trigger wire, monitor returns to previous view.
•
If the monitor is off, when the trigger wire is energized, the monitor will turn on to show THAT Camera. This safety feature is
particularly useful for night driving, as the monitor light can be distracting to the operator.
Convoy Technologies 6409 Highview Drive | Fort Wayne, IN 46808 | Ph (888) 565-2583
M7104
Installation Notes: Trigger wire function
•
work whether or not the trigger wire is connected . When using the
monitor, you may cycle between them to monitor either CAM 1 & CAM
.
Do not place cables where they may be
M7104 Camera Harness
All 4 Camera connections are powered from the monitor and All
M7104 Power/Trigger Harness
•
Red—Fused ACC power 12-24VDC
•
Black—Ground
•
Brown—Trigger CAM 1 (12-24VDC)
•
White—Trigger CAM 2 (12-24VDC)
•
Yellow—Trigger CAM 3 (12-24VDC)
•
Blue—Trigger CAM 4 (12-24VDC)
Labeled CAM 1—CAM 4
Monitor provides power to each
camera through this harness.