DV8 OFFROAD RBJL-11 Installationshandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge DV8 OFFROAD RBJL-11 herunter. DV8 OFFROAD RBJL-11 13 Seiten. Fs-15 rear bumper 18+ jeep wrangler jl
Seite druckenINSTALLATION
MANUAL
STEP 17 |
Install the provided foam
onto the provided license plate light.
Then, install the license plate with the
provided license plate light on to the
license plate mount.
Use the provided M4 and M6 hardware
with a philips head screwdriver, #4 allen
bit, 7mm socket, and a 10mm wrench.
STEP 18 |
Disconnect vehicle battery
by referring to manufacturers manual for
proper procedure.
Connect the license plate light by cutting
off the factory license plate light plug and
either cut back the factory wire loom to
expose more wire length, or use 22g wire
to extend the harness.
Using wire connectors and crimping tool,
connect the factory harness to your new
license plate light.
Cover in wire loom or electrical tape. Zip
tie to backside of license plate mount.
Reconnect vehicle battery by referring
to manufacturers manual for proper
procedure.
NEED HELP?
855-680-9595