Agri-Fab 175 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Streuwagen Agri-Fab 175 herunter. Agri-Fab 175 12 Seiten. Agri-fab 175 broadcast spreader owner's manual
Seite drucken
16. Assemble the flow control arm to the flow control
mounting bracket using a 1/4" x 1" hex bolt, two nylon
washers and a 1/4" nylock nut as shown in figure 8.
Tighten the nut until the flow control arm pivots with a
slight resistance.
17. Assemble the vinyl grip. See figure 8.
VINYL GRIP
FLOW
CONTROL
ARM
1/4" x 1"
HEX BOLT
FIGure 8
18. Place a 5/16" flat washer onto the end of the flow control
rod. Insert the end of the rod through the slot in the flow
control mounting bracket and through the hole in the
flow control link. Secure with a 3/32" x 3/4" cotter pin.
See figure 9.
5/16" FLAT
WASHER
FLOW
CONTROL
ROD
FIGure 9
FLOW CONTROL
MOUNTING
BRACKET
1/4" NYLOCK
NUT
(2) NYLON
WASHERS
3/32"
COTTER
PIN
SLOT
FLOW
CONTROL
LINK
19. Hook the free end of the flow control rod through the
hole in the slide gate bracket located near the bottom
of the hopper. See figure 10.
FIGure 10
20. Assemble the flow control mounting bracket to the hitch
tube using two 1/4" x 2" hex bolts, six 5/16" flat washers
and two 1/4" hex lock nuts as shown in figure 11. Do
not tighten at this time.
1/4" x 2"
HEX BOLT
5/16" FLAT
WASHER
FIGure 11
6
FLOW CONTROL
MOUNTING BRACKET
5/16" FLAT
WASHER
1/4" HEX
LOCK NUT