AusPress VETEC SPM24 Gebrauchsanweisung - Seite 6
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrowerkzeug AusPress VETEC SPM24 herunter. AusPress VETEC SPM24 18 Seiten. Battery powered hydraulic pressing tool
Seite drucken
Vetec SPM24
4.
Description of signs and symbols
L
Danger:
Th is indicates a warning; lack of observance may lead to injury or death.
P
Paragraphs:
Product safety information.
A
Caution/Important:
mage of the equipment or materials.
M
Operation and maintenance:
value.
N
Information:
Useful information for the correct usage of this product.
Read the instruc-
tion manual before
usage
5.
General indications
L
Th e manufacturer is not responsible for damage to persons or property caused by non-
observance of the instructions.
Th is device must be used exclusively for its intended use. Th is product may be used only
by personnel who have received training.
Th e instruction manual must be carried with the machine for its entire life period.
Th e user is required to:
•
make the instruction manual available to operators
•
ensure that the operator has read and understood the instructions
P
For all legal intents and purposes this instruction manual is valid.
6.
Application and use not in conformity with the intended purpose
Th e electro-hydraulic press tool BLUSPM24 is exclusively used for the production of a perma-
The electro-hydraulic press tool SPM24 is exclusively used for the production of a permanent
nent connection between tubes and press fi ttings in all usual types of material, such as PE-X-,
connection between tubes and press fittings in all usual types of material, such as PE-X-,
miltilayer composite and metal systems. Th e tool is only suitable for manual operation and af-
multilayer composite and metal systems. The tool is only suitable for manual operation
ter a series of approx. 40-50 press cycles, it must be allowed to cool down for about 10 minu-
and after a series of approx. 40-50 press cycles, it must be allowed to cool down for about
tes. See table on page 10 for the corresponding range of application Th e hydraulic powered
10 minutes. See table on page 10 for the corresponding range of application. The hydraulic
compression tool may be used exclusively in environments with illumination of at least 400
powered compression tool may be used exclusively in environments with illumination of at
lux, or in daylight.
least 400 lux, or in daylight.
6
Th is indicates a warning; not following this warning may lead to da-
Advice and indications in order to maintain the product´s
Wear goggles
Caution!
Danger of squee-
zing
BLUSPM24
SPM24