4ms Company Spectral Multiband Resonator Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medienkonverter 4ms Company Spectral Multiband Resonator herunter. 4ms Company Spectral Multiband Resonator 16 Seiten. Eurorack module
Basic features:
•
Six resonator/filter channels
•
Variable "Q" (Resonance) ranges from classic band-pass to highly resonant ringing
•
Ring of 20 full-color lights displays the channel frequency
•
Channel frequencies move about the scale using Rotation and Spread
°
Rotation "spins" the frequencies around the scale
°
Spread controls the gap between neighboring bands
•
Morph creates a variable speed cross-fade when the channels are rotated or spread
•
Lock buttons prevent each channel from changing in frequency (resonance can also be locked)
•
Freq Nudge knobs create de-tuning effects, or are useful for picking out a precise frequency
•
Frequency CV input (1V/octave) for even and odd bands (flip switch selects single or multiple channel control)
•
Stereo inputs and outputs stagger the bands into evens/odds for an immersive stereo field
•
Spectral content outputs for each channel (Env Out jacks) allow for vocoding (spectral transfer)
°
Switch selects Fast or Slow tracking speeds, or trigger outputs
°
Trigger output mode fires a trigger when envelope crosses a threshold: useful for extracting a beat from music
•
Sliders and CV jacks control each filter's level
•
Slew switch applies slew-limiting to the CV level jacks, which prevents clicking from clocks or triggers
•
Each bank has 11 scales of 20 frequencies/notes each
•
Scale banks for Western, Shrutis (India), Chromatic, Diatonic, Micro-tonal 17-note/octave, Gamelan (Pelog and
Slendro), Bohlen-Pierce 13-note tritave, Wendy Carlos's Alpha and Gamma scales. Both equal tempered and just
intonation tunings
•
Rotation/Spread moves about an entire bank, or can be limited to a single scale
•
White noise is normalized to the inputs, so the SMR can be used without an external signal
•
Settings and LED color scheme can be saved and recalled in multiple banks
Controls and jacks:
•
Filter channel level
°
Six sliders set the level of each filter
°
White light on each slider indicates filter level (flashes for clipping)
°
Six CV inputs for level of each filter. (0 to +5V). Slider attenuates CV on jack
•
Twenty full-color LEDs indicate which filters are assigned to which channel
°
Colors on light ring match colors of Env Out LEDs
°
Brightness of each light shows level of each filter
•
Resonance (Q)
°
Res (Q) CV jack (0 to +5V)
°
Knob (offsets CV jack)
•
Stereo input and output (divided into even/odd bands)
°
Odd input jack and Even output jack serve as Mono in/out
°
Clipping LED between IN jacks flickers when input is clipping (about 20Vpp or +/-10V)
•
Rotation shifts frequency pattern up or down
°
Rotate Clockwise trigger input (2V threshold)
°
Rotate Counter-clockwise trigger input (2V threshold)
°
Rotate CV jack maps any waveshape to a rotation pattern (0 to +5V)
•
Spread sets the interval (spacing) between channels
°
Spread CV input jack (0 to +10V)
°
Knob (offsets CV value)
•
Morph sets speed of cross fading rotating, spreading, or scale selection
°
Morph CV input jack (0 to +10V)
°
Knob (offsets CV jack)
•
Scale CV input jack selects scale from current bank (0 to +5V)
•
Six Env Out jacks: CV outputs that follow envelope of frequency content per band
°
Fast | Slow switch selects envelope tracking speed, or Trigger output mode
°
Pre/Post switch selects whether Env Out jacks track the filter before or after the slider attenuates
°
0 to +8V output
•
Six Lock buttons lock the frequency of each channel
°
Button is lit when locked
°
Rotation, Spread, Freq Nudge, Scale, and Bank will not change when locked
°
Turning Q knob while holding a lock button also locks the Q value (button flashes to indicate Q-lock)
°
Lock jack: locks/unlocks even or odd channels when triggered (2V threshold)
•
Freq jacks: 1V/oct frequency input jacks for even and odd channels (10 octave range, 0 to +10V)
•
135 | 1 switch selects if Freq jack, Freq Nudge knob, and Lock jack control all odd channels (1/3/5) or just channel 1
•
246 | 6 switch selects if Freq jack, Freq Nudge knob, and Lock jack control all even channels (2/4/6) or just channel 6
•
Slew switch enables slew-limiting of incoming CV on the level CV jacks (click and pop prevention)
°
Amount of slew limiting is proportional to Morph setting at the time the switch is flipped on.
•
Scale Rotation switch enables channels to rotate into the next/previous scale each time they rotate fully around
Note: The active voltage range for each jack is given. All jacks are tolerant of signals from -12V to +12V, but signals outside
the active range are clipped to the active range. For example, on a jack with an active range of 0 to +5V, a voltage of -4V is
seen by the SMR as 0V, and +8V is seen as +5V.
2