DVB MTO Series Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge DVB MTO Series herunter. DVB MTO Series 13 Seiten. Rear bumper 20+ jt jeep gladiator

Seite drucken

INSTALLATION

MANUAL

Begin by unpacking all items and inspecting

for missing pieces or damage. If you have any

concerns, please contact the company the

product was purchased from. Extra hardware

may be included with the product.

HARDWARE

INCLUDED

(2) M10x30 Allen

(4) M6x20 Allen

(2) M10x30 Hex

(8) M6 Flat Washers

(2) M10 Lock Nuts

(4) M6 Lock Nuts

(2) M10 Spring Washers

(2) M10 Flat Nuts

(6) M10 Washers

STEP 16 |

Install the trailer wiring

harness plug by pressing it into the place

through the bumper.

It should "snap" into place.

STEP 17 |

Install the light brackets

into bumper by using a 4mm allen bit and

10mm wrench..

Wide part of the light should be facing up,

and plug should be facing towards the

back of the bumper.

If you did not have to shave down the

tab on your lights, these should "snap"

into place, with no need to remove the

mounting bracket.

NEED HELP?

855-680-9595