Datatool EVO PRO Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Motorräder Datatool EVO PRO herunter. Datatool EVO PRO 9 Seiten.
Auch für Datatool EVO PRO: Benutzerhandbuch (5 seiten)

Seite drucken

12.0 - REMOTE CONTROL

The remote control has 2 different function buttons each of which corresponds

to a control signal that activates a selected action according to the operational

condition and alarm configuration.

The textured button is for arming/disarming the alarm while the smooth button

is used to exclude or trigger the siren.

• Arm/disarm alarm unit

Button 1

Button

• Trigger/Stop p

anic

alarm

• Exclude siren (mute alarm)

• Activate Hazard lights

The remote control has a low charge battery indicator that gives you early

warning to avoid malfunctioning. When the batteries are fully charged, the LED

will show a steady light at the press of a button. If the batteries are too weak for

normal operation, the LED will start blinking at the press of a button. To replace

the batteries proceed as follows:

BATTERIES

Remove the

Separate the shell

discharged batteries

halves taking care

and insert the new

not to damage the

ones taking care not to

internal circuit.

invert the polarity.

WARNING

se only CR1616 batteries.

Different type batteries can seriously damage the remote control unit.

Discard used batteries properly in special dedicated containers

PAGE16

13.0 - WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT

The present device falls within the field of application of the current WEEE

Directive. The crossed-out wheeled bin symbol on the equipment or on its

packaging indicates that the product, at the end of its useful life, must be

discarded separately from other waste to allow adequate treatment and

recycling.

The user must therefore take the equipment, at the end of its useful life, to an

appropriate waste collection facility.

LED

indicator

Button 1

Button 2

Close the plastic

shells and make

sure the remote

works properly.

14.0 - TECHNICAL SPECIFICATIONS

Nominal supply voltage

Load @ 12Vdc

< 1mA (alarm armed and LED flashing)

Load in sleep mode

Siren output level

Relay capacity

12 Vdc

< 1µA

118 dBA @ 1 meter

PAGE17