Datatool DT202 Betriebsanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Sicherheitssystem Datatool DT202 herunter. Datatool DT202 14 Seiten.

Seite drucken

Operating the DT202 Advanced Features

In addition to the basic functions the DT202 also offers the following advanced features:
•
Arm silently
•
Disarm silently
•

Arm in Transport Mode

•
Long Term Storage Mode
•
Bike Finder
•
Panic Alarm
•
Battery Monitoring
Arm Silently
If the arm/disarm tones are enabled, it is possible to arm the DT202 silently by pressing the
Programming Button on the remote immediately before pressing the Arm/Disarm button.
The buttons must be pressed within 3 seconds of each other, the DT202 will arm as normal
except the arming notification tones will not be sounded. Subsequent arming sequences will not
be affected.
Disarm Silently
If the arm/disarm tones are enabled, it is possible to disarm the DT202 silently by pressing the
Programming Button on the remote immediately before pressing the Arm/Disarm button.
The buttons must be pressed within 3 seconds of each other, the DT202 will disarm as normal
except the disarming notification tones will not be sounded. Subsequent disarming sequences
will not be affected. On disarming of the alarm system, if Automatic Rearming is enabled the
alarm LED will remain solid to indicate the this will occur.

Automatic Rearming

When enabled, the Automatic Rearming feature will arm the DT202 if the DT202 has been
disarmed via the two-button remote and the ignition is not switched on within 30 seconds. On
disarming of the alarm system, the alarm LED will remain solid to indicate the alarm system
Automatic Rearm will occur.
Turning on the ignition or arming via the two - button remote will cancel the Automatic Rearming
feature. Automatic Rearming is disabled by default.
To ensure the machine remains covered at the level chosen if it is accidentally disarmed, when the
system is disarmed it automatically starts a 30 second countdown after which the system will auto
re-arm at the SAME level it was last armed; be it fully armed, armed in Transport Mode or
immobiliser only.
NOTE: The DT202 will not automatically arm as a result of the ignition being switched off, unless
Passive Arming is enabled. However Passive Immobilisation will occur after 30 seconds.
Arm in Transport Mode
To arm the DT202 in Transport Mode, first press the Arm/Disarm button as normal to arm the
DT202. Then, within 3 seconds of the first button press, press the Programming button which will
disable the movement sensor; the DT202 will chirp a third time (if tones are enabled) and the
indicators will also flash a third time to indicate the movement sensor has been disabled.
The motorcycle instrument LED will now double flash instead of single flash to identify Transport
Mode has been activated.
Scorpion House, Drumhead Road, Chorley North Business Park, Chorley, Lancashire, England. PR6 7DE
Tel: +44 (0) 1257 249928 E mail:
Datatool is a brand of Scorpion Automotive Ltd
DT202 Operation Guide Revision 1 24-07-2023
Web: http://www.datatool.co.uk
4