ADE M45610 Betriebshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Skalen ADE M45610 herunter. ADE M45610 8 Seiten. Electronic floor scale

ADE M45610 Betriebshandbuch

To take the weight

-
Press key ON to start the scale. `8888´will appear on the display which is an automatic
function test and zero setting. When `0.0´appears you are in the kg weighing mode. In addition
display will show the symbol `o´ to confirm stability of the zero setting.
-
The scale may now be used.
-
Step on the platform and stand still.
-
After display is showing your weight and symbol `o´ appeared the most accurate result has
been reached.
-
To turn off the scale press key OFF for minimum 3 seconds. This is essential if scale is used
on batteries. Using the scale on mains it may remain permanently switched on or can be shut
off manually by pressing key.

Change unit function

You may select the weight unit between kg and lb. Coming from the factory the scale is switched to kg
mode. To change into lb mode press UNIT/HEIGHT key.
Caution
-
Please check weighing mode after switching to get proper result.

Set zero

You may set any displayed weighing result back to zero `0.0´by pressing the ZERO key. The
advantage is to weigh shoes or dress separately.
-
Place objects on the scale.
-
Press ZERO key.
-
Unload the scale.
-
The weight displayed before is showing a negative value and will be deducted automatically
during the next weighing procedure.
-
The negative value will not be stored.

Tare function

The tare function allows to store a fixed weight that will be deducted each weighing procedure unless
turned off or replaced by another value. This is useful in case the patient would need help like sitting
on a chair or being accompanied by a nurse.
-
Take weight of chair or nurse as described before and store the result by pressing the TARE
key.
-
The scale is now in NET weighing mode which is also indicated on the display.
-
Place the patient on the chair or accompany patient for weighing.
-
The weight displayed is the weight of the patient.
-
The scale identified the added weight. You may now use the scale for as many weighing
procedures and the stored value will always be deducted unless the scale has been turned off.
050100-Rev000-M45610

Weighing

4