Datatronics DA-5500 Series Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Disc-Duplikator Datatronics DA-5500 Series herunter. Datatronics DA-5500 Series 9 Seiten. Automatic disc duplicator
Auch für Datatronics DA-5500 Series: Benutzerhandbuch (10 seiten), Benutzerhandbuch (13 seiten)

Seite drucken

Datatronics Series Automatic Disc Duplicator User's Guide v2.1

1. Introduction

Thank you for purchasing DA-5500 series automatic disc duplicator. The DA-5500 series is a

stand-alone unattended duplicator that requires no computer connection during operation. It

consists of robotic mechanism that can automatically move discs from an input bin to the

burner, then to the output bin after duplication is complete. If any disc does not pass, the

robotic arm will pick it up and drop it to the reject bin.

Especially designed for office applications, the DA-5500 series is based upon a controller with

LCD displays, which makes all steps easy to follow during duplication. Should you encounter

any difficulty, please refer to "Trouble Shooting" or contact your dealer directly.

2. Reminders

We strongly suggest you to locate your DA-5500 series in a dust free environment in order to

eliminate contamination of discs that cause duplication rejects. Please also allow enough

space around the unit to make sure it can work properly. For media selection, we recommend

you to choose the branded discs, i.e. Verbatim, TDK, Sony, Samsung, Ricoh, Maxell, etc., and

make sure to reserve some discs for possible troubleshooting tool in the future. For your own

safety and the drive protection as well, do not use any damaged disc in order to prevent any

accident.

Under any circumstance, we do not encourage users duplicate copy protected materials.

3. Main Functions

3.1 HDD COPY

When Hard Drive is empty, please go to 3.4 LOAD DISC first.

When Hard Drive is not empty, and you wish to copy the data from a certain partition, please

place the blank discs on the input bin, then follow the steps here:

1. Press [ENTER] then use ↑↓ to choose which partition to copy the data from.

2. Press [ENTER] it will check source.

3. Press [ENTER] then use ↑↓ to select the write speed.

4. Press [ENTER] then use ↑↓ to set the counter.

5. Press [ENTER] to start duplication.