Aussie Pumps MINE BOSS Series Betriebsanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Hochdruckreiniger Aussie Pumps MINE BOSS Series herunter. Aussie Pumps MINE BOSS Series 16 Seiten.
Jan 2019
SAFETY PRECAUTIONS - IMPORTANT
NEVER direct the spray jet at any surface that
may contain asbestos material.
2. NEVER direct the spray jet at any person or
animal. Keep hands and feet clear of the cleaning
nozzle at all times.
3. NEVER hold a finger over the high pressure
nozzle.
4. NEVER direct the spray jet at the machine itself
or any electrical equipment.
5. After use, release the pressure in the high
pressure hose by operating the gun trigger.
6. DO NOT attempt any mechanical repair. If you
have a problem with your machine contact your
local Aussie Eco Clean Service Division, phone
(02) 8865 3500.
7. NEVER supply any liquid other than water to the
pump inlet.
8. DO NOT run dry
9. NEVER pull the high pressure hose if it has
formed kinks or nooses.
10. NEVER pull the hose over sharp objects.
SPECIFICATIONS
Model
Scud 350
Scud 351
Scud 400
Predator A
CARE OF FRAME & FLAT FREE TYRES ... MAINTAIN OPTIMUM PERFORMANCE
Aussie Scud blasters now come fitted
with top quality flat free tyres.
To maintain tyre shape ...
1. Ensure that straps used to secure
the unit during transit are not
over tightened to the point where
tyres misshape.
WORK SMART ... STAY SAFE
Diesel Engine
versions
Yanmar L100 e/s
Yanmar L100 e/s
Hatz 1B50
Yanmar L100 e/s
Hatz 'Silent pack'
Kohler KD477
2. Do not leave the unit strapped
down for extended periods.
3. Do not drop the unit; this could
cause frame distortion or damage
to bearings.
| Aussie Scud Mine Boss (Class A) ... Operator's Instruction Manual
11. DO NOT attempt to disconnect any hose or
coupling with pressure still in the hose.
12. DO NOT join hoses together to extend the length
(buy an extra long hose)
13. DO NOT operate the machine whilst standing on
ladders, use a platform tower or scaffolding.
14. DO NOT operate if there is a chance ice has
formed in the pump or hose. Thaw first.
15. Operate in well ventilated areas only.
16. DO NOT fill the fuel tank while engine is running
or hot
17. DO NOT try to repair a leak in the hose or
connection while the system is under pressure.
18. DO NOT substitute any component part on this
machine. Use of incorrect parts could cause
serious personal injury.
19. Children must NOT be allowed to use the
machine.
20. Always use safety goggles and steel cap boots
when using the machine.
Pump Model
Pump Pressure
TTL1520
3000
TTL2120
2500
TTL1330
4000
KTL1635
5000
Aussie Pumps
Flow rate
(psi)
(lpm)
15
21
15
16
Pump rpm
1450
1450
1450
1450
5