Aussie Pumps RAPTOR EXTREME 21 Safe Operator-Bedienungsanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Safe Operator-Bedienungsanleitung für Industrielle Ausrüstung Aussie Pumps RAPTOR EXTREME 21 herunter. Aussie Pumps RAPTOR EXTREME 21 16 Seiten. Mine boss hydro-blasters

Seite drucken
Aussie Pumps
ASSEMBLY AND PREPARATION FOR USE
Before proceeding with assembly of your new Aussie Eco
Raptor high pressure blaster, check that all parts listed
below are included.
1 x 500 bar gun lance assembly
1 x 500 bar high pressure hose
1 x high pressure hose restraint
1 x 500 bar protective apron
Gun/hose/restraint Set Up:
Slide hose protector over the hose end.
Screw on the hose to gun nipple
Attach restraint to attachment plate
Aussie Safety Protection Kit
Detergent injector
Safety valve
WORK SMART ... STAY SAFE
6
AUSSIE SAFE BLASTING
Unloader - factory set,
DO NOT adjust
| Aussie Raptor (Class B) ... Operator's Instruction Manual
A.
Machine Preparation (initial start-up)
1.
Check the oil in the pump. With the machine on a
level surface the oil level should cover the red spot in
the oil level sight glass on the side of the pump. If
necessary, top up pump with SAE 75W-90.
Do not mix different grades of oil as this may affect
the machines performance. If alternative oil is used,
first empty out oil by unscrewing drain plug in
bottom of machine.
2.
Ensure
breather
WARNING: Before operation ensure top mounted
travel plug is replaced by breather plug. Failure to fit
breather and keep clean can result in over pressuring
of oil chamber (crank case) and can blow oil seals.
This will void warranty.
3.
Check oil level in engine, check engine manual for
details of oil to use.
4.
Check fuel level and fill if necessary. (unleaded
petrol)
B.

Hose Connections

1.
Connect gun/lance assembly to high pressure hose.
Use hose restraint between gun and hose as per
Safety Standard AS/NZS 4233.1 for Class B
machines.
2.
Check inlet water filter is clean then connect water
UNLOADER SETTING
The high pressure unloader on the machine is factory
set to operate the pump at it's rated pressure.
DO NOT ADJUST. Tampering with the unloader will
void warranty and can be dangerous.
August 2019
Breather plug
pump
plug
is
fitted
to
pump.