Datavideo DAC-07 Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Medienkonverter Datavideo DAC-07 herunter. Datavideo DAC-07 13 Seiten. Analogue to sd-sdi converter

Seite drucken

Product Overview

Thank you for purchasing the DAC-07 Analogue to SD-SDI converter.

The DAC-07 is designed to be an affordable bridge between existing cameras with SD Analogue Video

outputs and SD-SDI equipment or mixers such as the Datavideo SE-900 and SE-1000.

Due to the nature of SD-SDI signals, single BNC SD-SDI cable runs of up to 120m should be possible with

this unit before the signal would need to be re-clocked or repeated.

The DAC-07 also has the ability to embed two channels of audio (or 1 stereo pair) into the SD-SDI signal

from either unbalanced RCA/Phono connections or balanced 3pin XLR connections.

NB:

Ensure the dip switch settings match the video signal being fed into the DAC-07.

Connecting both XLR and RCA/Phono audio sources at the same time is not recommended.

A separate Time Base Corrector may be required if the unit is fed poor AV signals from tape.

Before operating this device please also refer to the section marked SD-SDI Cabling Advice.

Front Panel

Output Connections

Front Input Connections

SDI – Serial Digital Interface on BNC terminals.

4:2:2 SDI Video data supports SMPTE 259 M-C standard at 270 Mbps.

Component Y.U.V. (Y.Pb.Pr.) video input on BNC terminals.

S-Video (Y/C) on 4-Pin Mini Din Input.

Unbalanced RCA/Phono audio connections for CH1/L and CH2/R.