Datavideo DAC-200 Installationshandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Installationshandbuch für Medienkonverter Datavideo DAC-200 herunter. Datavideo DAC-200 16 Seiten. Important note to make dac-200 work with pinnacle dv500:
Auch für Datavideo DAC-200: Erste Schritte (13 seiten), Referenzhandbuch (1 seiten), Wichtige Hinweise (9 seiten)

Seite drucken

Installation / Connections

There are many possible ways to connect a DAC 200 to different systems.

Illustrated below are the two most common set ups, DV output from an NLE

system to an analogue recorder, and Analogue output to a PC / MAC NLE

system.

If your analogue device has SVideo connections available it is advisable to use

them as the signal quality will be superior to composite (RCA / Phono)

connections. If you are using SVideo (Y/C) connections do make sure you also

connect the Red and White (RCA / Phono) connectors for audio.

Many analogue VCRs have SCART connectors, it is no problem to use these with

a DAC 200 however you will need to use a SCART to 3 Phono / RCA Adaptor,

available from high street electrical stores. These adaptors are available in three

types, IN only, OUT only and switchable (IN and OUT), a switchable adaptor

would allow the most flexibility.

Connecting an analogue VCR or Camcorder to a PC / MAC NLE

System

Connect the analogue output from the VCR or Camcorder to the inputs on the

front of the DAC 200. If SVideo (Y/C) is available it is best to use it.

Connect the DV Out from the DAC 200 to the IEEE 1394 / DV In on your NLE

system. Press the source button on the DAC 200 to ensure the AV light is on.

Make sure your DIP switch settings are correct for your set up (see page 11)